9. COMMUNICATOR TOUCH PANEL
About this chapter
This chapter gives a short introduction of the Communicator Touch Panel, describes how to install the Communicator Touch Panel
interface onto the top of your DP2K-E series projector and how to connect the interface. For operation instructions refer to the user
guide of the Communicator software. The latest software version and updated user guide for the Communicator can be downloaded
from https://my.barco.com.
The Communicator Touch Panel is not included in the package of the projector. An alternative for the Communicator Touch Panel
is the use of the Communicator for PC (Mac, Linux or Windows).
Overview
•
Communicator Touch Panel
•
Installing the Touch Panel interface
•
Repositioning the Touch Panel interface
R5906693 DP2K-E SERIES 19/06/2015
9. Communicator Touch Panel
69