Barco DP2K SLP Series User And Installation Manual
  1. Manuals
  2. Brands
  3. Barco Manuals
  4. Projector
  5. DP2K SLP Series
  6. User and installation manual

Barco DP2K SLP Series User And Installation Manual

Hide thumbs Also See for DP2K SLP Series:
Table of Contents

Advertisement

Quick Links

DP2K SLP Series
User and Installation manual
R5906847/00
02/06/2017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DP2K SLP Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Barco DP2K SLP Series

Summary of Contents for Barco DP2K SLP Series

  • Page 1 DP2K SLP Series User and Installation manual R5906847/00 02/06/2017...
  • Page 2 Barco NV President Kennedypark 35, 8500 Kortrijk, Belgium Phone: +32 56.36.82.11 Fax: +32 56.36.883.86 Support: www.barco.com/en/support Visit us at the web: www.barco.com Printed in Belgium...
  • Page 3 The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of justified notice of complaint, Barco can repair the fault or provide a replacement at its own discretion within an appropriate period.

  • Page 5: Table Of Contents

    10.4 Back Focal Length adjustment .....................100 R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 6 Index........................169 R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 7: Safety

    DP2K SLP-series projector. Clarification of the term “DP2K SLP-series” used in this document When referring in this document to the term “DP2K SLP-series” means that the content is applicable for following Barco products: • DP2K-10SLP, DP2K-8SLP Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guar- antee.

  • Page 8: General Considerations

    • Before operating this equipment please read this manual thoroughly and retain it for future reference. • Installation and preliminary adjustments should be performed by qualified Barco personnel or by authorized Barco service deal- ers. • All warnings on the projector and in the documentation manuals should be adhered to.
  • Page 9 The part number and serial number are printed on a label which is stuck on the respective part. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Barco dealer regarding this product. Product article number...

  • Page 10: Important Safety Instructions

    Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and unused for long periods of time, remove all power from the projector. This will prevent damage to the projector due to lightning and AC power-line surges. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 11 fire extinguishers. Never use water on an electrical fire. Always have service performed on this projector by authorized Barco service personnel. Always insist on genuine Barco replacement parts. Never use non-Barco replacement parts as they may degrade the safety of this projector.
  • Page 12 If the product exhibits a distinct change in performance, indicating a need for service. • Replacement parts: When replacement parts are required, be sure the service technician has used original Barco replacement parts or authorized replacement parts which have the same characteristics as the Barco original part. Unauthorized substitu- tions may result in degraded performance and reliability, fire, electric shock or other hazards.

  • Page 13: Product Safety Labels

    IEC EN 60825-1:2014) 危害距离：请参考 安全手册 DANGER ! NE PAS REGARDER LE FAISCEAU EVITER TOUTE EXPOSITION DIRECTE DES YEUX AU FAISCEAU. RG3 IEC EN 62471-5:2015. CLASS 1 IEC EN 60825-1:2014. DISTANCE DE SECURITE : CONSULTER LE MANUEL DE SECURITE. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 14: High Brightness Precautions: Hazard Distance (Hd)

    (RZ) in the theater must be established. This can be done by using physical barrier, like a red rope as illustrated in image 1-2. The restricted area sticker can be replaced by a sticker with only the symbol. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 15 1. Safety RESTRICTED AREA Image 1-2 R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 16: Hd For Fully Enclosed Projection Systems

    The light emitted from the screen within the observation shall never exceed the RG2 exposure limit, determined at 10 cm. The can be neglected if the measured light at the screen surface is below 5000 cd/m² or 15000 LUX. diffuse R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 17: Hd In Function Of Modifying Optics

    1. Safety HD in function of modifying optics Hazard Distance 10SLP 8SLP Throw Ratio Image 1-4 R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 18 1. Safety R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 19: Getting Started

    Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guar- antee. Observing the specification mentioned in this chapter is critical for projector performance. Neglecting this can result in loss of warranty.

  • Page 20: Installation Requirements

    Barco offers a pedestal for the DP2K SLP-series projector. This universal pedestal allows for a solid and easy setup of the projector. The universal pedestal support 19” rack systems. (projector peripherals such as alternative content switchers, ShowVault, etc.)
  • Page 21 2. Getting started AUTION An external frame must be used to stack projectors. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 22: Unpacking The Projector

    4. Remove the polystyrene foam (reference 4 image 2-2) from the top of the projector. Image 2-2 5. Open the plastic bag and lift the projector out of its packaging, using the handles provided in the projector base. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 23 2. Getting started Image 2-3 6. Remove the protective foam from the Lens Holder opening. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 24: Initial Inspection

    This check should confirm that there are no broken knobs or connectors, that the cabinet and panel surfaces are free of dents and scratches, and that the operating panel is not scratched or cracked. The Barco Sales and Service office should be notified as soon as possible if this is not the case.

  • Page 25: Communicator Pc Version

    Configuration tool A uniquely powerful and easy to use configuration tool for the Barco cinema projector. This Communicator software for PC provides all the necessary tools and only those tool necessary for the connected projector to setup and control this projector. A comprehensive array of easy to access menu pages provide the projectors digital input, output and screen display via a combination of simple buttons and displays.

  • Page 26: Commander & Web Commander

    The ‘Barco Web Commander’ user interface is readily available on the projector without any additional software installation. It is accessed via a web browser and is also fully supported on iOS and Android tablets thanks to the free ‘Barco CineMate’ iOS and Android app.

  • Page 27: Installation Process

    Let the projector acclimatize to ambient conditions after unpacking. Neglecting this may result in a startup failure of the light processor unit. Overview • Installation process overview • Software upgrade • Starting up and adjusting the system R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 28: Installation Process Overview

    7. Installation of the optional Communicator Touch Panel. See chapter "Installing the Touch Panel interface", page 86. 8. Upgrade all software to the latest available version. See "Software upgrade", page 25. 9. Start up your projector and adjust the system. See "Starting up and adjusting the system", page 26. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 29: Software Upgrade

    RED may indicate a tamper event during transport. If so, contact Barco customer service. 2. Download and install the latest version of Communicator. The program can be downloaded for free from Barco’s website, (URL: http://www.barco.com). Click on myBarco and login to get access to secured information. Registration is necessary.

  • Page 30: Starting Up And Adjusting The System

    Panel) to configure the applied source. See the user guide of the Communicator (Touch Panel) for more detailed information. In case the projector is equipped with an Integrated Media Block (IMB) or Integrated Media Server (IMS) see user guide of the IMB or IMS for detailed instructions. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 31: Physical Installation

    This chapter describes how the mechanical and electrical set up of your DP2K SLP-series projector has to be done. Overview • Positioning the DP2K SLP-series projector at port window • Connecting the projector with the power net R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 32: Positioning The Dp2K Slp-Series Projector At Port Window

    Image 4-1 Positioning at port window Barco offers a pedestal for the DP2K SLP-series projector. This universal pedestal allows for a solid and easy setup of the projector. The universal pedestal support 19” rack systems. (projector peripherals such as alternative content switchers, ShowVault, etc.) Necessary tools •...
  • Page 33 Adjust the height of the 3 legs until the projected image matches the projection port window and the screen tilt. Use a 14 mm open wrench to adjust the height as illustrated (reference 2 image 4-3). Secure the leg height by tightening the nuts (reference 1 image 4-3) of each projector foot. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 34 The back feet of the projector can be turned out maximum 150 mm. This correspond with a forward tilt of 7° if the front foot is completely turned in. Barco offers a pedestal for the DP2K SLP-series projector. This universal pedestal allows you to easily tilt the projector forward up to 6°.

  • Page 35: Connecting The Projector With The Power Net

    1.7Nm (1.25 lbf*ft). Warning: Connect first the PE wire (reference 4 image 4-6), then the other wires (reference 5 image 4-6). Tip: Check for good fixation by pulling on each wire. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 36 5. Install the cover of the main AC compartment. Fasten the two captive thumb screws (reference 1 image 4-7). Image 4-7 6. Install the rear cover of the projector. See procedure "Installation of the rear cover", page 143. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 37: Lenses & Lens Selection

    Each time a lens is manipulated (e.g. removed and installed in a projector), it needs to be homed and returned. Overview • Available lenses • Lens selection • Lens installation • Lens removal • Lens shift, zoom & focus R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 38: Available Lenses

    0.69" DC2K zoom lens 1.34 - 1.9 (R9856521) 0.69" DC2K zoom lens 1.5 - 2.15 (R9856522) Image 5-4 Image 5-5 0.69" DC2K zoom lens 1.7 - 2.55 (R9856523) 0.69" DC2K zoom lens 2 - 3.9 (R9856524) R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 39: Lens Selection

    5. Lenses & Lens selection Lens selection Which lens do I need? 1. Go to Barco’s website on www.barco.com and click on myBarco 2. Login on. If you are not yet registered create a login and password. With the created login and password, it is possible to enter myBarco.

  • Page 40: Lens Installation

    FOCUS barrels of the installed lens. AUTION Never transport the projector with a Lens mounted in the Lens Holder. Always remove the Lens before transporting the projector. Neglecting this can damage the Lens Holder and Prism. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 41: Lens Removal

    It’s recommended to place the foam rubber of the original projector packaging, back into the Lens opening to prevent intrusion of dust. Note that this foam rubber is packed in a plastic bag to prevent the dust, emitted by the foam, from entering the projector. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 42: Lens Shift, Zoom & Focus

    1. Use the “+” and “-” zoom buttons on the Local Keypad to zoom in or out. ZOOM ZOOM Image 5-12 How to focus? 1. Use the “+” and “-” focus buttons on the Local Keypad to focus the image on the screen. FOCUS Image 5-13 R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 43 PURPLE : When pushing the Shift, Zoom or Focus button the backlight color is purple of the part of the button that is pushed. This indicates that the requested action is ongoing. • RED : The backlight color of the Shift, Zoom and Focus buttons is red in case of end of range. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 44 5. Lenses & Lens selection R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 45: Input & Communication

    Note that all information about the ICMP is gathered into one separated chapter: "ICMP", page 53. Overview • Introduction • Local Keypad • Projector Status • Integrated Cinema Processor (ICP) • HD-SDI Input Module (optional) • Integrated Media Block/Server (optional) • Cinema Controller R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 46: Introduction

    Input slot for IMB, IMS, or HD-SDI input module (in case no ICMP is installed. ICP. AUTION A unit may only be removed from the card cage by qualified service personnel. Removing one of the boards (except for the Cinema Controller) will result in an authorization request upon starting. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 47: Local Keypad

    Shift button The Shift button (reference 7 image 6-2) allows you to shift the lens up/down or left/right. The backlight color of the Shift button is red in case the end of range is reached. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 48 Key button a red backlight color means that the projector is not secured (tamper event). • YELLOW : The backlight color of the Numeric buttons 1 to 6 of the Local Keypad changes from blue to yellow if the (security) Key button is pressed. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 49: Projector Status

    GPIO of the Cinema Controller (not the GPIO of the ICMP), or via the Communicator. The projector always boots up in the same mode (E.g. Standby or Sleep) as it was switched OFF. The Sleep button is disabled if the Light Source is on. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 50: Integrated Cinema Processor (Icp)

    6. Input & Communication Integrated Cinema Processor (ICP) In case the projector is equipped with a Barco ICMP no ICP board is inserted. All ICP functionality is integrated in the Barco ICMP. LEDs and ports on the Integrated Cinema Processor...

  • Page 51: Hd-Sdi Input Module (Optional)

    3GSDI link 4:2:2 12 Progressive YCbCr 3G-level A-Single link Single bits/color 3G-level B-Dual link 4:4:4 10 Progressive 3G-level A-Single link bits/color 3G-level B-Dual link 4:4:4 12 Progressive XYZ/RGB 3G-level A-Single link bits/color 3G-level B-Dual link R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 52 Dual (separate left / right eye) 3G - Level B - Single Interleaved Dual (separate left / right eye) 4:4:4 10 Progressive 3G - Level A - Single bits/color Interleaved Dual (separate left / right eye) R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 53 YCbCr 3G - Level A - Single field dominant Interleaved Dual (separate left / right eye) Progressive SF- 2nd YCbCr 3G - Level A - Single field dominant Interleaved Dual (separate left / right eye) R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 54: Integrated Media Block/Server (Optional)

    Image 6-7 Example of IMS powered by Doremi. Configuration and operation instructions for IMB and IMS are not included in this document. See manufactur- ers website of the installed IMB/IMS for technical documentation and support. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 55: Cinema Controller

    The connectors used for these Ethernet ports are of the type RJ45, which is compatible with standard RJ45 cable connector. Straight (most common) as well as cross linked network cables can be used. The 2 ports are functionally identical. Both ports are connected via the projector switch (Auto sensing enabled). R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 56 RS-232 standard, and is functionally identical to the CCITT V.24 standard. Logical ’0’ is > + 3V, Logical ’1’ is < - 3V. The range between -3V and +3V is the transition zone. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 57: Icmp

    ICMP HDD status LEDs • ICMP device certificate • ICMP configuration via Communicator • ICMP reset • Obtaining the Barco ICMP certificate • Removing a HDD from the ICMP • Installing a HDD into the ICMP R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 58: Icmp Introduction

    The last produced model is equipped with two HDMI 2.0 as video source. Image 7-3 Front face ICMP (with HDMI 2.0). Some models with DisplayPorts are still present on the field. Image 7-4 Front face ICMP (with DisplayPort). R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 59 The Card Cage can be different depending the projector type but it always consists of a button module and several removable units. The ICMP (reference 1) is inserted into the former ICP slot and IMB slot above the Barco Cinema Controller (reference 2).

  • Page 60: Icmp Hdd

    Once the drive is removed from the original packaging the recommended maximum period between drive operation cycles is 30 days. During any storage period the drive non-operational temperature, humidity, wet bulb, atmospheric conditions, shock, vibration, magnetic and electrical field specifications should be followed. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 61: Icmp Communication Ports

    The ICMP can be connected to a USB 3.0 Media to load content. The USB port can be used to load content (DCP), or keys (KDM), or software update. NOTE: These ports are recommended for fast ingest when connected to an appropriate USB 3.0 source. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 62 USB 3.0 defines a new SuperSpeed mode with a signaling speed of 5 Gbit/s and a usable data rate of up to 4 Gbit/s (500 MB/s). A USB 3.0 port is usually colored blue, and is backwards compatible with USB 2.0. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 63: Icmp Source Input Ports

    NOTE: It is recommended to use the HDMI 2.0 ports for faster transfer of video and audio data. 3G-SDI A (B) SDI connector to connect a video source. HDMI HDMI 1.4 connector to connect a video source. DisplayPort A (B) DisplayPort connector to connect a video source. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 64: Icmp Displayport Specifications

    1920 x 2160 @ 30, 48, 50, 60 fps 8 bpc, 10 bpc A+B span Port Display Mode 4K Horizontal SPAN 3D Color depth 2048 x 2160 @ 60 fps 8 bpc, 10 bpc A+B span R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 65 Active Pixels, and Active Lines Vertical Refresh 8 bits/color - 10 bits/color Frame locked • All input resolutions are scaled towards the desired resolution specified in the screen presentation file. • Fractional frame rates = (Hz*1000)/1001 R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 66: Icmp Sdi Specifications

    3G HD-SDI uses a higher data rate (2.97 Gb/s). This allows a single cable interface to achieve the same capabilities of a Dual-Link HD-SDI implementation. In direct mapping (level A) this is used to achieve higher frame rates. (50, 59.940 and 60 fps streams are supported). 1. Not supported in Alchemy R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 67 Scan Type 1920 x 1080 23.976 23.976 Progressive SMPTE 274M 2048 x 1080 Y Cb Cr 4:2:2 12-Bit only SMPTE 428-8 Y Cb Cr 4:4:4 10 or 12-Bit 29.970 29.970 RGB (XYZ) 4:4:4 10 or 12-Bit R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 68 29.97 29.97 RGB (XYZ) 4:4:4 10 or 12-Bit 2. mainly used to carry stereoscopic images. 3. only supported in 3G level A mapping, others formats are supported in both level A and level B mapping. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 69 Dual Stream 3G HD-SDI (SMPTE 425) formats SMPTE Standard Source Resolution Frame Rate Display Rate Scan Type SMPTE 292M 1920 x 1080 23.976 47.952 Progressive SMPTE 428-9 2048 x 1080 Y Cb Cr 4:2:2 10-Bit 29.970 59.940 R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 70: Icmp Hdmi 2.0 Specifications

    YCbCr 4:4:4 YCbCr 4:2:2 1280x720 100, 119.88, 120 YCbCr 4:4:4 YCbCr 4:2:2 1920x1080 23.976, 24, 25, 29.97, 30, 50, 59.94, 60 2048x1080 YCbCr 4:4:4 YCbCr 4:2:2 1920x1080 100, 119.88, 120 2048x1080 YCbCr 4:4:4 YCbCr 4:2:2 R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 71 The pixel data will be reconstructed using the all 8 bits of port A and using the 4 most significant bits of port B. HDMI 2.0 Supported Passive 3D Formats (3D formats only) Format Frame Rate Color coding Bit depth 1920x1080 24, 30 2048x1080 YCbCr 4:4:4 YCbCr 4:2:2 R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 72 24, 30 4096x2160 YCbCr 4:4:4 YCbCr 4:2:2 In Passive 3D HDMI2 input port A should contain the pixel data of Left Eye and HDMI2 input port B should contain the pixel data for Right Eye. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 73: Icmp Hdmi 1.4 Specifications

    Format Frame Rate Color coding Bit depth 1280x720 50, 59.94, 60 1920x1080 23.98, 24 HDMI 1.4 Supported 3D (Top Bottom) Formats Format Frame Rate Color coding Bit depth 1280x720 50, 59.94, 60 1920x1080 23.98, 24 R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 74 7. ICMP HDMI 1.4 Supported Audio Formats Format Bit depth Sample Rate Sample coding 2 channels 32, 44, 48, 88, 96 L-PCM 5.1 channels L-PCM 7.1 channels L-PCM R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 75: Icmp Status Leds

    Security Manager - FPGA self-test Green Blinking Green Starting Applications Green Green Applications started in normal mode Green Orange Applications started in degraded mode Blinking Red FIPS error Green Blinking Orange Update ongoing Orange Orange Update done R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 76: Icmp Hdd Status Leds

    80. Ensure to insert the HDDs firmly. If problem remains try “RAID Initialize”. See user guide of the Communicator. Note that all content will be lost! If problem remains contact Service for further instructions. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 77 7. ICMP In case the ICMP has to be returned to factory (e.g. for repair) the non defective HDDs should be removed and kept. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 78: Icmp Device Certificate

    Purpose of the Barco ICMP device certificate The device certificate (*.pem) of the Barco ICMP is a digital certificate signed by Barco which is required when ordering the KDM to play a DCP that is ingested on the ICMP. The device certificate is stored inside the ICMP and on a web server.
  • Page 79 Products that have been tested per the DCI Compliance Test Plan (CTP) are posted at the DCI compliance web site. Notably, DCI compliance does not require compliance to the full set of SMPTE DCP standards. A copy of the most recent DCI specification can be downloaded from the DCI website (http://dcimovies.com). R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 80: Icmp Configuration Via Communicator

    • Verify internal clock of the ICMP. All installation and maintenance operations on the ICMP are performed via Communicator, the Barco config- uration software. Please refer to the Communicator user guide for further information. About Default settings The restore of factory setting is a feature that allows removing all settings performed on the ICMP and replaces them with the default values set at the factory.

  • Page 81: Icmp Reset

    As a result the projector is safely prepared for the ICMP reboot. All ongoing events on the ICMP (e.g. ingest) are stopped immediately and the ICMP restarts. Image 7-13 ARNING Resetting the ICMP with the hardware reset button may cause damage to the content on the HDDs. A re-configuration of the whole system may be required! R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 82: Obtaining The Barco Icmp Certificate

    7. ICMP 7.14 Obtaining the Barco ICMP certificate Necessary tools Smartphone (with auto-focus) or control software (e.g. Communicator, Commander or WEB Commander) Using the CertID label to download the ICMP certificate 1. Scan the QR code (reference 1) on the front face of the ICMP with a smartphone. It’s recommended to use a smartphone with auto-focus.

  • Page 83: Removing A Hdd From The Icmp

    3. Push the unlock button to open the handle. Image 7-16 4. Pull the HDD out of its slot. Image 7-17 To install the HDD see procedure "Installing a HDD into the ICMP", page 80. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 84: Installing A Hdd Into The Icmp

    This procedure assumes that the HDD slot of the ICMP is empty. If not, see procedure "Removing a HDD from the ICMP", page 79. AUTION Always use a new empty spare part HDD from Barco to replace a malfunction HDD. Do not use a HDD from another ICMP HDD set. AUTION Always make sure that all HDDs in the ICMP HDD set have the same storage capacity.
  • Page 85 Once the RAID is completed the red LED turns off. AUTION It’s strongly recommended to complete the RAID recovery process prior to starting a show. This to ensure that the content integrity is preserved and that the show is not interrupted. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 86 7. ICMP R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 87: Communicator Touch Panel

    The Communicator Touch Panel is not included in the package of the projector. An alternative for the Communicator Touch Panel is the use of the Communicator for PC (Mac, Linux or Windows). Overview • Communicator Touch Panel • Installing the Touch Panel interface • Repositioning the Touch Panel interface R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 88: Communicator Touch Panel

    Touch Panel interface is installed more then a few meters away from the DP2K SLP-series. Parts location of the Touch Panel interface Image 8-2 Touch screen Communication panel Knob to operate central swivel clamp Base of swivel arm Power input 12 VDC, 1.5A RS232 port (sub-D) Ethernet port (RJ45) R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 89 Touch Panel power/data customized cable Image 8-3 Customized cable to connect Touch Panel interface with the Barco projector. The Communicator Touch Panel has its own user guide which latest version is available on the Barco website. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 90: Installing The Touch Panel Interface

    Image 8-5 3. Place the Touch Panel interface upon the mounting plate of the swivel arm and fasten the two wing nuts (reference 5 image 8-6) as illustrated. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 91 Note: Ensure to tighten the locking nut on the connector. Image 8-8 6. Attach the multi cable to the swivel arm using the two Velcro strips. 7. Position the Touch Panel interface in the desired location. See "Repositioning the Touch Panel interface", page 88. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 92: Repositioning The Touch Panel Interface

    Image 8-9 3. Move the Touch Panel interface to the desired position. 4. Fasten the central swivel clamp by turning the knob clockwise. AUTION Never release the central swivel lock without supporting the Touch Panel interface. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 93: Starting Up

    This chapter contains the switch ON and switch OFF procedures of your DP2K SLP-series. These procedures highlight all important points to be checked prior to switching the projector ON. This is to ensure a safe startup of the projector. Overview • Switching the DP2K SLP-series ON • Switching the DP2K SLP-series OFF R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 94: Switching The Dp2K Slp-Series On

    AUTION See user’s guide of the Communicator Touch Panel to operate and control the DP2K SLP-series. When for any reason a restart of the projector is required, the content server should be restarted also. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 95: Switching The Dp2K Slp-Series Off

    The backlight color of the Sleep button is red in Sleep mode even when the projector is finishing the after cooling cycle. Note: Pressing the Sleep button before the after cooling cycle has finished, will restart the projector in a normal way. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 96 9. Starting up R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 97: Scheimpflug

    The DMD plane, the principal lens plane and the sharp focus plane will intersect in a line below the projector for downward lens tilt. Overview • Scheimpflug introduction • Scheimpflug adjustment • Fixation of the Lens Holder front plate • Back Focal Length adjustment R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 98: Scheimpflug Introduction

    Set screw for nut No3. Set screw for nut No4. Lock nut. Lock nut. Lock nut. Lock nut. Reference 1, 2 and 3 are adjustment points. Reference 4 is a locking point and NOT used during Scheimpflug adjustment. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 99 SHIFT functionality of the Lens Holder to match the projected image with the projection screen. In case the SHIFT range is not sufficient then the projector can be tilted and Scheimpflug can be applied. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 100: Scheimpflug Adjustment

    8. Fully loosen the Scheimpflug nut at the lower left of the Lens Holder (reference 4 image 10-5). Use a 13mm nut driver. 9. Optimize the focus of the projected image in the center of the screen (F) using the motorized focus control (Local Keypad). FOCUS Image 10-5 R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 101 5. Repeat from step 1 until the projected focus pattern is as sharp as possible in the center, left, right, top and bottom of the screen. 6. Proceed with the procedure "Fixation of the Lens Holder front plate", page 98. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 102: Fixation Of The Lens Holder Front Plate

    Note: Ensure that the edges of the projected test pattern remain in place on the screen. Any movement of the image will affect the Scheimpflug adjustment. Tip: Fasten the set screw and the Scheimpflug nut alternately, without disturbing the projected image, until the Scheimpflug nut and set screw are completely tightened. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 103 10. Scheimpflug Image 10-12 7. Fasten the lock nut at the lower left of the Lens Holder. Use a 10mm nut driver. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 104: Back Focal Length Adjustment

    5. Zoom the lens for maximum image on the screen (WIDE). 6. Is it possible to focus the center of the projected image? If yes, the Back Focal Length is OK. If no, the Back Focal Length needs realignment. Proceed with the next procedure. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 105 Note: This is the nominal position of the Lens Holder. Image 10-17 4. Zoom the lens for maximum image on the screen (WIDE) and focus the center of the projected image using the motorized focus control (Local Keypad). R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 106 Note: the same turning direction as in step 4 is applicable. Image 10-21 8. Check if it is possible to focus the center of the projected image using the motorized focus control (Local Keypad) for WIDE and for TELE. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 107 If no, Scheimpflug adjustment is required. See procedure "Scheimpflug adjustment", page 96, prior to fixate the Lens Holder front plate. CAUTION: Skip the action, in the Scheimpflug adjustment procedure, to turn the three Scheimpflug adjustment nuts until the front of the nut is equally aligned with the front of the threaded rod! R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 108 10. Scheimpflug R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 109: Convergence

    This chapter describes how to prepare your DP2K SLP-series for convergence adjustment and how to adjust the convergence. Overview • Convergence controls • Preparing for convergence adjustment • Converging the blue pattern onto the red pattern • Converging the green pattern onto the red pattern • Closing off the Light Processor compartment R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 110: Convergence Controls

    Processor top fan unit in it’s upper position, hereby still providing the necessary cooling to the unit. Image 11-1 Blue channel, knob number 1. Blue channel, knob number 2. Blue channel, knob number 3. Green channel, knob number 4. Green channel, knob number 5. Green channel, knob number 6. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 111 Thereafter, return the image back immediately to the correct position. The knob should now have become tighter in the final position and therefore resists turning due to vibrations and such. Repeat the procedure if you feel the knob is still loose. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 112: Preparing For Convergence Adjustment

    7. Select the convergence test pattern, which is illustrated below (image 11-4). Use the communicator to activate the convergence test pattern. Note: The convergence test pattern can NOT be activated via the PATTERN button on the Local Keypad. Image 11-4 R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 113: Converging The Blue Pattern Onto The Red Pattern

    5. Repeat from step 1 until full coincidence is obtained of the blue pattern in the center, lower left and upper right of the projected image. 6. Continue with the procedure: "Converging the green pattern onto the red pattern", page 110. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 114: Converging The Green Pattern Onto The Red Pattern

    5. Repeat from step 1 until full coincidence is obtained of the green pattern in the center, lower left and upper right of the projected image. 6. Switch off the projector. 7. Continue with the procedure Closing off the Light Processor compartment. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 115: Closing Off The Light Processor Compartment

    3. Install the side cover plate of the Light Processor compartment. 4. Install the top cover of the projector. 5. Install the left side cover of the projector. 6. Switch on the projector. 7. Clear the security warning. See procedure page 130. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 116 11. Convergence R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 117: Color Calibration

    About this chapter This chapter describes the luminance and color calibration process for the DP2K SLP series. Where applicable references are made to the user guide of the Communicator for detailed menu navigation instructions. The first chapter describes the complete calibration process in chronological order.

  • Page 118: Calibration Process

    First activate the INPUT file. b) then activate the PCF file (PCF already contains plane 1 information), c) then activate the MCGD and TCGD files. For detailed instructions on how to create a macro see Communicator’s user guide. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 119: Color Gamut Calibration

    This correction is introduced by the DMD drivers and is also called ‘P7 correction’. The electronic correction takes place once the MCGD file of the projector is mapped with the TCGD file of the film. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 120 For detailed instructions see user guide of the Communicator. 5. In addition you can check if the corrected colors complies. Use therefore the Communicator. Go to Installation > Color calibration > Verify corrected colors. For detailed instructions see user guide of the Communicator. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 121: Preventative Maintenance Actions

    Contact your service partner for more information about maintenance services. Overview • 1 month maintenance actions • 3 month maintenance actions R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 122: Month Maintenance Actions

    ’lens files’ remain valid. See user guide of the Communicator software. Check the porthole (both sides) for dust. Clean the porthole in case dust is clearly visible upon the surface. Use an optical cloth. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 123: Month Maintenance Actions

    Verify the internal clock of the ICMP with real time clock. Correct if needed. ICMP version 1.2.1 is required. Communicator version 5.0 is required. See user guide of Communicator for detailed instructions. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 124 13. Preventative maintenance actions R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 125: Maintenance Procedures

    Check the small dust filter • Vacuum cleaning of the dust filters • Washing and drying the dust filters • Cleaning the lens • Cleaning the exterior of the projector • Authorization to clear security warning on the projector R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 126: Check The Large Dust Filter

    5. Attach a clean dust filter to the cover plate. Ensure that both latches and both mounting lips (reference 4 image 14-2) of the dust filter are engaged. Caution: UNDER NO CIRCUMSTANCES SHOULD WET FILTERS BE INSTALLED BACK INTO THE PROJECTOR. THIS CAN HAVE SERIOUS SAFETY CONSEQUENCES AS WELL AS JEOPARDIZE THE INTERNAL OPTICS OF THE SYSTEM. Image 14-2 R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 127 6. Install the dust filter assembly back at the front side of the projector. Use a 7mm flat screwdriver to fasten the two captive screws. Ensure that the two mounting lips (reference 2 image 14-1) of the assembly are engaged in the projector chassis. The dust filter is cleanable. See cleaning procedure for correct cleaning and drying instructions. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 128: Check The Small Dust Filter

    5. Attach a clean dust filter to the cover plate. Ensure that both latches (reference 4 image 14-4) of the dust filter are engaged. Caution: UNDER NO CIRCUMSTANCES SHOULD WET FILTERS BE INSTALLED BACK INTO THE PROJECTOR. THIS CAN HAVE SERIOUS SAFETY CONSEQUENCES AS WELL AS JEOPARDIZE THE INTERNAL OPTICS OF THE SYSTEM. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 129 6. Install the dust filter assembly back at the front side of the projector. Use a 7mm flat screwdriver to fasten the captive screw. The dust filter is cleanable. See cleaning procedure for correct cleaning and drying instructions. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 130: Vacuum Cleaning Of The Dust Filters

    Lightly tap the filter on its dusty side to expel heavy dust contamination. Tip: Compressed air is also permitted to clean the filters but take care not to damage them. Caution: Do not damage the dust filter. Replace damaged dust filters immediately. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 131: Washing And Drying The Dust Filters

    About filter washing and drying For environments where popcorn grease and such can contaminate the filters, Barco advises the client to purchase one extra set of filters to cover drying time, as well as taking following extra precautions and instructions pertaining to filter cleaning and drying.

  • Page 132: Cleaning The Lens

    If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty cloth. 4. Pressurized air cans are not efficient if there is too much dust on the surface, the pressure is too low R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 133: Cleaning The Exterior Of The Projector

    1. Switch off the projector and unplug the projector from the mains power net. 2. Clean the housing of the projector with a damp cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 134: Authorization To Clear Security Warning On The Projector

    In case of a correct code entry, the color of the backlight of the Numeric keys 1 to 6 changes to green for 1 second and then back to blue. Each attempt to clear the security warning and its result (successfully or unsuccessfully) is logged inside the projector. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 135: Removal And Installation Of The Projector Covers

    Installation of the top cover plate of the Light Processor compartment • Installation of the left side cover • Installation of the top cover • Installation of the rear cover • Installation of the Light Source cover R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 136: Removal Of The Light Source Cover

    How to remove the Lamp House cover? 1. Loosen the four captive screws (reference 1 image 15-1) of the Lamp House cover using a 7 mm flat screwdriver. 2. Remove the Lamp House cover from the projector. Image 15-1 R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 137: Removal Of The Rear Cover

    How to remove the rear cover? 1. Loosen the four captive screws (reference 1 image 15-2) of the rear cover using a 7 mm flat screwdriver. 2. Remove the rear cover from the projector. Image 15-2 R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 138: Removal Of The Top Cover

    How to remove the top cover? 1. Loosen the four captive screws (reference 1 image 15-3) of the top cover using a 7 mm flat screwdriver. 2. Remove the top cover from the projector. Image 15-3 R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 139: Removal Of The Left Side Cover

    first. Image 15-4 2. Loosen the five captive screws (reference 2 image 15-5) of the left side cover using a 7 mm flat screwdriver. 3. Remove the left side cover from the projector. Image 15-5 R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 140: Removal Of The Top Cover Plate Of The Light Processor Compartment

    Grab the top cover plate by the two handles (reference 2 image 15-7) and slide it towards the front side (lens side) of the projector. All latches (reference 3 image 15-7) must become free. b) Tilt the top cover plate as illustrated. c) Move the top cover plate away from the projector. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 141 15. Removal and installation of the projector covers Image 15-7 R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 142: Removal Of The Side Cover Plate Of The Light Processor Compartment

    1. Remove the screw at the top of the cover plate (reference 1 image 15-8) and the two screws at the bottom of the cover plate (reference 2 image 15-8). Use a 3mm Allen wrench. 2. Remove the side cover plate left (A) then up (B) then away (C). Image 15-8 R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 143: Installation Of The Side Cover Plate Of The Light Processor Compartment

    Opening the Light Processor compartment by removing the top cover plate or side cover plate will result in a tamper event. An authorization to clear the security warning on the projector, after closing off the Light Processor compartment, will be needed! R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 144: Installation Of The Top Cover Plate Of The Light Processor Compartment

    Opening the Light Processor compartment by removing the top cover plate or side cover plate will result in a tamper event. An authorization to clear the security warning on the projector, after closing off the Light Processor compartment, will be needed! R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 145: Installation Of The Left Side Cover

    3. Install the small dust filter at the front side of the projector. Use a 7 mm flat screw driver to fasten the captive screw (reference 2 image 15-13) of the small dust filter assembly. Image 15-13 R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 146: Installation Of The Top Cover

    How to install the top cover? 1. Install the top cover on the projector. 2. Fasten the four captive screws (reference 1 image 15-14) of the top cover using a 7 mm flat screwdriver. Image 15-14 R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 147: Installation Of The Rear Cover

    How to install the rear cover? 1. Install the rear cover on the projector. 2. Fasten the four captive screws (reference 1 image 15-15) of the rear cover using a 7 mm flat screwdriver. Image 15-15 R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 148: Installation Of The Light Source Cover

    How to install the Light Source cover? 1. Install the Light Source cover on the projector. 2. Fasten the four captive screws (reference 1 image 15-16) of the Light Source cover using a 7 mm flat screwdriver. Image 15-16 R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 149: Specifications

    Overview • Specifications of the DP2K-8SLP series • Specifications of the DP2K-10SLP series • Dimensions of the DP2K SLP-series projector • Dimensions of the universal pedestal • Technical Regulations R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 150: Specifications Of The Dp2K-8Slp Series

    Projector @ full laser power: 1.3 kW Noise Level 56dB(A) Media server Barco Alchemy ICMP and other IMB brands supported. 3D systems Active glasses systems and polarization systems on silver sceens are supported. Color separation systems (Dolby3D and 6P) are not supported.

  • Page 151: Specifications Of The Dp2K-10Slp Series

    Projector @ full laser power: 1.5 kW Noise Level 56dB(A) Media server Barco Alchemy ICMP and other IMB brands supported. 3D systems Active glasses systems and polarization systems on silver sceens are supported. Color separation systems (Dolby3D and 6P) are not supported.

  • Page 152: Dimensions Of The Dp2K Slp-Series Projector

    A. Specifications A.3 Dimensions of the DP2K SLP-series projector Dimensions TOP FIXATION POINTS M10 POINT OF GRAVITY min. 41,5 252,5 316,6 max. 150 188,4 370,5 Image A-1 Dimensions given in mm R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 153: Dimensions Of The Universal Pedestal

    A. Specifications A.4 Dimensions of the universal pedestal Dimensions 876,3 Image A-2 Dimensions given in millimeters. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 154: Technical Regulations

    A. Specifications A.5 Technical Regulations Certificates R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 155: Pin Configurations

    B. Pin configurations B. PIN CONFIGURATIONS Overview • About General Purpose Inputs & Outputs (GPIO) • Pin configurations of the Cinema Controller communication ports • Pin configurations of the ICMP communication ports R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 156: About General Purpose Inputs & Outputs (Gpio)

    General Purpose outputs The Barco Cinema Controller and the Barco ICMP have each eight (8) opto-isolated outputs available. Four (4) of the outputs on the Cinema Controller are dedicated for TI. The other general purpose outputs can be controlled via software.
  • Page 157 The GPO signals of the Cinema Controller and ICMP will return to their default output level when the projector is switched to power- off. This could generate unexpected "Falling Edge" triggers at the output pins. Also during power-on the GPO signals may generate unexpected "Rising Edge" events. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 158: Pin Configurations Of The Cinema Controller Communication Ports

    Name Name +12V +12V Grnd 3D Input Reference - Grnd 3D Display Reference + RS232 RX 3D Display Reference - RS232 TX CONN_3D MODE - CONN_3D_MODE + CONN_SYNC - CONN_SYNC + 3D Input Reference + R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 159: Pin Configurations Of The Icmp Communication Ports

    AES pair RJ-45 pin 9, 10 11, 12 13, 14 15, 16 General Purpose Output: GPO 1-4 Definition RJ-45 pin EXT_GPOUT_1_P EXT_GPOUT_1_N EXT_GPOUT_2_P EXT_GPOUT_2_N EXT_GPOUT_3_P EXT_GPOUT_3_N EXT_GPOUT_4_P EXT_GPOUT_4_N GPO 5-8 Definition RJ-45 pin EXT_GPOUT_5_P EXT_GPOUT_5_N R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 160 Green Orange AES 1&2 +minus White/Orange White/Green AES 3&4 +plus Blue Blue AES 5&6 +minus White/Blue White/Blue AES 5&6 +plus Orange Green AES 3&4 +minus White/Brown White/Brown AES 7&8 +plus Brown Brown AES 7&8 +minus R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 161 568A + 568A wiring is a straight cable. 568B + 568B wiring is a straight cable. The mapping of the channels is done according to the Ethernet wiring scheme and gives us 100 Ohm per pair. R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 162 B. Pin configurations R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 163: Environmental Information

    C. Environmental information C. ENVIRONMENTAL INFORMATION Overview • Disposal information • China RoHS compliance • Taiwan RoHS compliance • Turkey RoHS compliance • Hazards • Production address • Contact information R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 164: Disposal Information

    For more information about recycling of this product, please contact your local city office or your municipal waste disposal service. For details, please visit the Barco website at: http://www.barco.com/en/AboutBarco/weee...

  • Page 165: China Rohs Compliance

    (Also called RoHS of Chinese Mainland), the table below lists the names and contents of toxic and/or hazardous substances that Barco’s product may contain. The RoHS of Chinese Mainland is included in the MCV standard of the Ministry of Information Industry of China, in the section “Limit Requirements of toxic substances in Electronic Information Products”.
  • Page 166 Chinese Mainland, marked with the Environmental Friendly Use Period (EFUP) logo. The number inside the EFUP logo that Barco uses (please refer to the photo) is based on the “General guidelines of environment-friendly use period of electronic information products”...

  • Page 167: Taiwan Rohs Compliance

    備考2.〝O〞係指該項限用物質之百分比含量未超出百分比含量基準值。 Note 2：“O” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 備考3.〝-〞係指該項限用物質為排除項目。 Note 3：The “-” indicates that the restricted substance corresponds to the exemption. R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 168: Turkey Rohs Compliance

    C. Environmental information C.4 Turkey RoHS compliance Turkey RoHS compliance Türkiye Cumhuriyeti: AEEE Yönetmeliğine Uygundur. [Republic of Turkey: In conformity with the WEEE Regulation] R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 169: Hazards

    Potential Chronic Health Effects: Slightly hazardous in case of skin contact (sensitizer). The substance may be toxic to upper respiratory tract, skin, eyes. Repeated or prolonged exposure to the substance can produce target organ damage. More info about the product can be found on website of “unep” or the link below: http://www.chem.unep.ch/irptc/sids/oecdsids/Naco.pdf R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 170: Production Address

    Barco NV Noordlaan 5, B-8520 Kuurne (BELGIUM) CFG Barco (Beijing) Electronics Co. Ltd. 中影巴可（北京）电子有限公司 3rd Floor, Barco Factory, No.16 Changsheng Road, Changping District, 102200, Beijing, P.R.C. 北京市昌平区中关村科技园区昌平园昌盛路16号巴可工厂第3层 邮政编码：102200 Barco Visual (Beijing) Electronics Co. Ltd. 巴可伟视（北京）电子有限公司 No.16 Changsheng Road, Changping District, 102200, Beijing, P.R.C 北京市昌平区中关村科技园区昌平园昌盛路16号...

  • Page 171: Contact Information

    Registered office address: President Kennedypark 35, 8500 Kortrijk, Belgium Contact address: Beneluxpark 21, 8500 Kortrijk, Belgium Importers contact information To find your local importer, contact Barco directly or one of Barco’s regional offices via the contact information given on Barco’s web site, www.barco.com. Made in information The made in country is indicated on the product ID label on the product itself.
  • Page 172 C. Environmental information R5906847 DP2K SLP SERIES 02/06/2017...

  • Page 173: Index

    21, 83 General Purpose I/O Compartment Getting started Light Processor Configuration GPIO Connect Main AC Connections HD-SDI Convergence 105–110 Hazard Distance 10, 12–13 Blue onto red Modifying optics Control knobs Hazards Controls HD-SDI Extenders Front panel R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 174 Remove 37, 79–80, 131–136, 138 Replace Covers Left side cover 135, 141 79–80 Install Left side cover Remove Lens Lens 36–38, 94, 96, 128 Light Source cover Cleaning Rear cover Focus Side cover plate Installation R5906847 DP2K SLP SERIES 02/06/2017...
  • Page 175 3G-SDI DisplayPort HDMI HDMI 2.0 Vacuum Source input ports Filters Source settings HD-SDI Specifications 60, 62, 66, 69, 145–147 DisplayPort DP2K-10SLP Washing DP2K-8SLP Filters HDMI 1.4 HDMI 2.0 Stacking Zoom Starting up 89–90 Switching on R5906847 DP2K SLP SERIES 02/06/2017...

Table of Contents