Removal Of The Top Cover Plate Of The Light Processor Compartment - Barco DP2K-E series User And Installation Manual

16. Removal and installation of the projector covers

16.6 Removal of the top cover plate of the Light Processor compartment

To access the top cover plate of the Light Processor compartment the projector top cover has to be removed
first. This procedure assumes that the projector top cover is already removed.
C
AUTION
result in a tamper event. An authorization to clear the security warning on the projector, after closing off the
Light Processor compartment, will be needed!
Necessary tools
3mm Allen wrench.
How to remove the top cover plate from the Light Processor compartment?
1. Remove the seven screws (reference 1, image 16-7) of the top cover plate. Use a 3 mm Allen key.
Image 16-7
2. Grip the 2 handles (reference 2, image 16-8) and slide the cover towards the front of the projector until the 8 cover latches
(reference 3, image 16-8) are free.
2
Image 16-8
3. Remove the top cover plate.
126
:
Opening the Light Processor compartment by removing the top cover plate or side cover plate will
1
A
1
2
R5906693 DP2K-E SERIES 19/06/2015