Barco DP2K-E series User And Installation Manual page 71

Image 8-17
5. Switch on the projector.
In case you replace one HDD (e.g. degraded mode) the ICMP automatically starts with the RAID recovery
process. The red LED of the HDD which has to be rebuilt is blinking. This process takes about 200 GB per
hour. Once the RAID is completed the red LED turns off.
C
AUTION
to ensure that the content integrity is preserved and that the show is not interrupted.
R5906693 DP2K-E SERIES 19/06/2015
:
It's strongly recommended to complete the RAID recovery process prior to starting a show. This
8. ICMP
67