Removing A Hdd Form The Icmp - Barco DP2K-E series User And Installation Manual

8.10 Removing a HDD form the ICMP

In case the ICMP has to be returned to factory (e.g. for repair) the non defective HDDs should be removed and
kept.
How to remove a HDD ?
1. Switch off the projector.
2. Moving the latch towards the left.
Image 8-12
3. Push the unlock button to open the handle.
Image 8-13
4. Pull the HDD out of its slot.
Image 8-14
To install the HDD see procedure "Installing a HDD into the ICMP", page 66.
R5906693 DP2K-E SERIES 19/06/2015
8. ICMP
65