Installation Of The Top Cover - Barco DP2K-E series User And Installation Manual

16.12 Installation of the top cover

Necessary tools
3 mm Allen key.
To install the top cover, the front and back covers must be removed. This procedure assumes the front and
back covers are already removed.
How to install the top cover?
1. Position the top cover on the projector.
2. Fasten the three screws at the front and the three screws at the back (reference 1, image 16-16). Use a 3 mm Allen key.
1
Image 16-16
R5906693 DP2K-E SERIES 19/06/2015
16. Removal and installation of the projector covers
1
133