Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Barco DP2K-20CLP
Summary of Contents for Barco DP2K-20CLP
- Page 1 DP2K CLP series Safety manual R5906714/01 09/05/2016...
- Page 2 Barco NV President Kennedypark 35, 8500 Kortrijk, Belgium Phone: +32 56.36.82.11 Fax: +32 56.36.883.86 Support: www.barco.com/en/support Visit us at the web: www.barco.com Printed in Belgium...
-
Page 3: General Considerations
Read and follow these “warnings” and “cautions” as well. Clarification of the term “DP2K-CLP series” used in this document When referring in this document to the term “DP2K-CLP series” means that the content is applicable for following Barco products: •... -
Page 4: Restricted Access Location
The part number and serial number are printed on a label which is stuck on the respective part. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Barco dealer regarding this product. Product article number... -
Page 5: Important Safety Instructions
fire extinguishers. Never use water on an electrical fire. Always have service performed on this projector by authorized Barco service personnel. Always insist on genuine Barco replacement parts. Never use non-Barco replacement parts as they may degrade the safety of this projector. -
Page 6: To Prevent Battery Explosion
If the product exhibits a distinct change in performance, indicating a need for service. • Replacement parts: When replacement parts are required, be sure the service technician has used original Barco replacement parts or authorized replacement parts which have the same characteristics as the Barco original part. Unauthorized substitu- tions may result in degraded performance and reliability, fire, electric shock or other hazards. -
Page 7: To Prevent Projector Damage
For functionality and reliability, the projector requires accurate temperature control and cooling. Therefore a liquid cooling sys- tem is provided consisting of liquid circuits inside the projector which are connected via hoses to external coolers. Only cooler models and hoses exclusively developed for this application and approved by Barco are allowed to be used. •... -
Page 8: High Brightness Precautions: Hazard Distance (Hd)
1. Safety Label image Label description Label location WARNING! DO NOT LOOK INTO THE LIGHT BEAM NO DIRECT EYE EXPOSURE TO THE BEAN IS PERMITTED RG3 IEC EN 62471–5:2015 CLASS 1 IEC EN 60825–1:2014 HAZARD DISTANCE: CONSULT SAFETY MANUAL COMPLIES WITH 21 CFR 1040 EXCEPT WITH RESPECT TO THOSE CHARACTERISTICS AUTHORIZED BY VARIANCE NUMBER 2014-V-0285 DATED APRIL 14, 2016 RISK GROUP 3 LIP IEC... -
Page 9: Restricted Area
1. Safety For example, cinema projectors that have a HD greater than 1 m and emit light into an uncontrolled area where persons may be present should be positioned in accordance with “the fixed projector installation” parameters, resulting in a HD that does not extend into the audience area unless the beam is at least 2 m above the floor level. -
Page 10: Hd For Fully Enclosed Projection Systems
1. Safety HD for fully enclosed projection systems Hazard Distance (HD) is the distance measured from the projection lens at which the intensity or the energy per surface unit becomes lower than the applicable exposure limit on the cornea or on the skin. The light beam is considered (to be) unsafe for exposure if the distance from a person to the light source is less than the HD. -
Page 11: Hd In Function Of Modifying Optics
1. Safety HD in function of modifying optics DP2K-15CLP Hazard Distance Image 1-4 DP2K-20CLP Hazard Distance Image 1-5 R5906714 DP2K CLP SERIES 09/05/2016...
Need help?
Do you have a question about the DP2K-20CLP and is the answer not in the manual?
Questions and answers