Barco DP2K-E series User And Installation Manual page 23

Image 3-2
5. Open the plastic bag and lift the projector out of its packaging, using the handles provided in the projector base.
Image 3-3
6. Remove the plastic cover from the Lens Holder opening.
After unpacking, allow the projector to acclimatize to a room temperature ranging from 10°C (50°F) to
35°C (95°F) MAX. Neglecting this may result in a start up failure of the Light Processor Unit.
R5906693 DP2K-E SERIES 19/06/2015
2
3
4
3. Getting started
19