12. Convergence
12.5 Closing off the Light Processor compartment
Necessary tools
•
7mm flat screwdriver.
•
3mm Allen wrench.
How to close off the Light Processor compartment?
1. Place the fan on top of the Light Processor in the lower position. Ensure that the four mounting pins (1) of the fan assembly are
engaged.
Caution:
Take care of the wire.
Image 12-11
2. Install the side cover plate of the Light Processor compartment.
3. Install the top cover of the projector.
4. Install the left side cover of the projector.
5. Switch on the projector.
6. Clear the security warning. See "Authorization to clear security warning on the projector", page 117.
98
1
1
R5906693 DP2K-E SERIES 19/06/2015