Removal Of The Rear Cover - Barco DP2K-E series User And Installation Manual

16.2 Removal of the rear cover

W
ARNING
cedure.
Necessary tools
7 mm flat screwdriver.
How to remove the rear cover?
1. Loosen the five captive screws (reference 1image 16-2 ) of the rear cover using a 7 mm flat screwdriver.
Image 16-2
2. Remove the rear cover from the projector.
R5906693 DP2K-E SERIES 19/06/2015
:
Switch off the projector prior to start with this procedure, unless otherwise specified in the pro-
16. Removal and installation of the projector covers
1
121