16. Removal and installation of the projector covers
16.8 Installation of the side cover plate of the Light Processor compartment
Necessary tools
3 mm Allen key.
How to install the side cover plate from the Light Processor compartment?
1. Place the side cover plate into position and slide to the right until all slots of the side cover plate are correctly engaged.
Image 16-10
2. Fasten the side cover plate into place with four screws at the top and two screws at the bottom (reference 1, image 16-10). Use
a 3 mm Allen key.
C
AUTION
result in a tamper event. An authorization to clear the security warning on the projector, after closing off the
Light Processor compartment, will be needed!
128
:
Opening the Light Processor compartment by removing the top cover plate or side cover plate will
1
1
R5906693 DP2K-E SERIES 19/06/2015