Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Barco DP2K-10SLP
Summary of Contents for Barco DP2K-10SLP
- Page 1 DP2K-SLP Series Safety & Environmental Information R5906846/00 11/05/2017...
- Page 2 Barco NV President Kennedypark 35, 8500 Kortrijk, Belgium Phone: +32 56.36.82.11 Fax: +32 56.36.883.86 Support: www.barco.com/en/support Visit us at the web: www.barco.com Printed in Belgium...
-
Page 3: Safety & Environmental Information
DP2K-SLP projector. Clarification of the term “DP2K-SLP” used in this document When referring in this document to the term “DP2K-SLP” means that the content is applicable for following Barco products: •... -
Page 4: Important Safety Instructions
The part number and serial number are printed on a label which is stuck on the respective part. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Barco dealer regarding this product. Product article number... -
Page 5: To Prevent Personal Injury
1. Safety & Environmental Information • A readily accessible disconnect device must be incorporated externally to the equipment for removal of the power to the pro- jector mains terminals. • Warning: High leakage current. Earth connection essential before connecting supply. •... - Page 6 In the event of fire, use sand, CO electrical fire. Always have service performed on this projector by authorized Barco service personnel. Always insist on genuine Barco replacement parts. Never use non-Barco replacement parts as they may degrade the safety of this projector.
-
Page 7: Product Safety Labels
If the product exhibits a distinct change in performance, indicating a need for service. • Replacement parts: When replacement parts are required, be sure the service technician has used original Barco replacement parts or authorized replacement parts which have the same characteristics as the Barco original part. Unauthorized substitu- tions may result in degraded performance and reliability, fire, electric shock or other hazards. -
Page 8: High Brightness Precautions: Hazard Distance (Hd)
1. Safety & Environmental Information Label image Label description Label location 警告！ 勿观看光束 眼睛勿直接接触可允许暴露的光束 (RG3 IEC EN 62471-5:2015 CLASS 1 IEC EN 60825-1:2014) 危害距离：请参考 安全手册 DANGER ! NE PAS REGARDER LE FAISCEAU EVITER TOUTE EXPOSITION DIRECTE DES YEUX AU FAISCEAU. RG3 IEC EN 62471-5:2015. CLASS 1 IEC EN 60825-1:2014. DISTANCE DE SECURITE : CONSULTER LE MANUEL DE SECURITE. -
Page 9: Restricted Area
1. Safety & Environmental Information Based on national requirements, no person is allowed to enter the projected beam within the zone between the projection lens and the related hazard distance (HD). This shall be physically impossible by creating sufficient separation height or by placing barriers. The minimum separation height takes into account the surface upon which persons other than operator, performers or employees are permitted to stand. -
Page 10: Hd In Function Of Modifying Optics
1. Safety & Environmental Information RA Restricted Access location (enclosed projection area). PR Projector. Theater (observation area). Restriction Zone. PD Projection Distance. SW Separation Width. Must be minimum 1 meter. For this type of setup 3 different HD shall be considered: •... -
Page 11: Turkey Rohs Compliance
Registered office address: President Kennedypark 35, 8500 Kortrijk, Belgium Contact address: Beneluxpark 21, 8500 Kortrijk, Belgium Importers contact information To find your local importer, contact Barco directly or one of Barco’s regional offices via the contact information given on Barco’s web site, www.barco.com. Made in information The made in country is indicated on the product ID label on the product itself. -
Page 12: Production Address
北京市昌平区中关村科技园区昌平园昌盛路16号 邮政编码：102200 1.11 Download Product Manual Download Product Manual Product manuals and documentation are available online at www.barco.com/td. Registration may be required; follow the instructions given on the website. IMPORTANT! Read Installation Instructions before connecting equipment to the mains power supply.
Need help?
Do you have a question about the DP2K-10SLP and is the answer not in the manual?
Questions and answers