16.7 Installation of the side cover plate of the Light Processor compartment
Necessary tools
3mm Allen wrench.
How to install the side cover plate from the Light Processor compartment?
1. Place the side cover plate into position as illustrated. Ensure that all 12 slots of the side cover plate are engaged (three at each
side).
Image 16-9
2. Fasten the side cover plate with a screw at the top (reference 1 image 16-9) and the two screws at the bottom (reference 2
image 16-9). Use a 3mm Allen wrench.
C
AUTION
result in a tamper event. An authorization to clear the security warning on the projector, after closing off the
Light Processor compartment, will be needed!
R5905961 ZEUS 09/03/2015
C
C
:
Opening the Light Processor compartment by removing the top cover plate or side cover plate will
16. Removal and installation of the projector covers
1
B
B
A
2
149