Table of Contents
Advertisement
15.7 Installation of the side cover plate of the Light Processor compartment
Necessary tools
3mm Allen wrench.
How to install the side cover plate from the Light Processor compartment?
1. Place the side cover plate into position as illustrated. Ensure that all 12 slots of the side cover plate are engaged (three at each
side).
Image 15-9
2. Fasten the side cover plate with a screw at the top (reference 1 image 15-9) and the two screws at the bottom (reference 2
image 15-9). Use a 3mm Allen wrench.
C
AUTION
result in a tamper event. An authorization to clear the security warning on the projector, after closing off the
Light Processor compartment, will be needed!
R5977692 DP2K-S SERIES 10/12/2012
C
C
:
Opening the Light Processor compartment by removing the top cover plate or side cover plate will
15. Removal and installation of the projector covers
1
B
B
A
2
125
Advertisement
Table of Contents
