Air Guide Plate Removal - Honda Pioneer SXS700M2P 2019 Owner's Manual

Air Guide Plate Removal

Refer to Safety Precautions on page 105.
The air guide plate must be removed to the brake light switch
adjustment and throttle cable adjustment.
Removal
1. Remove the front hood (page 119).
2. Remove the clips (page 121).
3. Pull out the clamp while pressing both side of the anchor.
4. Remove the air guide plate.
Installation
1. Insert the prongs into the frame.
2. Install the clamp until it seats properly.
3. Install the clips.
4. Install the front hood.
air guide plate
prong
120 Servicing Your Honda
clamp
clips
anchor
prong