Clutch System - Honda FOURTRAX FOREMAN 4X4 TRX500FM 2009 Owner's Manual

Clutch System

Your ATV's shift-activated, wet, multiplate clutch is part of the primary
drive system. Proper adjustment allows a smooth, gradual engagement
when shifting gears.
Clutch Adjustment
Refer to Saf ety Precautions
LEFT FRONT
(1) left air guide
(2) screw
1. Make sure the engine is cool.
2. Make sure the ignition switch is OFF (
3. Remove the left engine sub cover (page
4. Remove the left air guide ( ) by removing the screw ( ).
5. Loosen the lock nut ( ).
6. Turn the clutch adjuster ( ) counterclockwise until you feel slight
resistance.
7. Turn the adjuster 1/4 turn clockwise, then tighten the lock nut to hold
the adjuster in this position.
8. After adjustment, start the engine and test ride your ATV to be sure
the clutch is operating properly.
9. Install the removed parts in reverse order of removal.
If you cannot get proper adjustment, or the clutch does not work
properly, the clutch friction discs may be worn. See your Honda dealer
or refer to official Honda Service Manual (page
Servicing Your Honda
132
on page
(4)
(3)
1
3
4
95 .
(1)
(2)
(3) lock nut
(4) clutch adjuster
).
113 ).
218
2
).