System Maintenance; Enable Software Options; Upgrade System Software; Upgrade Software From A Web Server - Polycom RealPresence Immersive Studio Administrator's Manual

Realpresence immersive telepresence (itp)
Hide thumbs Also See for RealPresence Immersive Studio:
Table of Contents

Advertisement

System Maintenance

Topics:

Enable Software Options

Upgrade System Software

In the web interface, you can configure, manage, and monitor RealPresence ITP systems from a
computer. You can also use Polycom RealPresence Resource Manager, or the API commands.
Enable Software Options
Some of the features of a RealPresence Immersive Studio system are optional. To activate these
features, you must enter a key code using the provided license.
Procedure
1. Go to Admin Settings > General Settings > Options and enter the key code.
2. Enable the following options on the primary system:
Telepresence Interoperability Protocol (TIP). This option provides the best possible
telepresence experience when interoperating with Cisco TelePresence
Skype for Business Interoperability License. This option enhances the video experience
by enabling the use of the Microsoft RTV video codec, which provides higher resolutions
during video calls when integrated with Microsoft Lync Server.
Centralized Conferencing Control Protocol (CCCP) enables seamless participation in
multipoint video conferences hosted on Lync's audio/video server.
IPv6 is supported in Lync 2013, Skype for Business Server 2015, and Skype for Business
2015 client environments with IPv6 networks.
For information about integrating with Microsoft Lync Server, refer to the Polycom Unified
Communications Deployment Guide for Microsoft Environments.
Advanced Video 1080p License. This option makes 1080p video and content available to
RealPresence Immersive Telepresence systems.
RealPresence Immersive Studio. This option identifies the Polycom video conferencing
system that you are using.
Upgrade System Software
You can update RealPresence Immersive Studio by going to support.polycom.com, going to Documents
and Downloads > Telepresence and Video, and then downloading and installing the appropriate
software.

Upgrade Software from a Web Server

If your organization uses a management system for provisioning endpoints, you can enter the server
address where software updates are stored to update the system.
Polycom, Inc.
®
rooms equipment.
64

Advertisement

Table of Contents
loading

Table of Contents