Stun / Turn / Ice Parameters - Polycom Trio 8800 User Manual

LLDP Parameters
Template Parameter
device.cfg, device.net.lldpFastStart
site.cfg Count

STUN / TURN / ICE Parameters

This section lists parameters that configure the following Microsoft network features:
● Session Traversal Utilities for NAT (STUN)
● Traversal Using Relays Around NAT (TURN)
● Interactive Connectivity Establishment (ICE)
STUN / TURN / ICE Parameters
Template Parameter
Template
firewall-nat. tcpIpApp.ice.password
cfg
firewall-nat. tcpIpApp.ice.mode
cfg
firewall-nat. tcpIpApp.ice.stun.ser
cfg ver
firewall-nat. tcpIpApp.ice.stun.udp
cfg Port
Polycom, Inc.
Permitted Values
Configure the fast-start LLDP
packets that the phone sends
when booting up or when the
network comes up.
5 (default)
3 - 10
If fast-start packet count is
configured > 10 the, the value
resets to 10. If the fast-start
packet count is < 3, the value
resets to 3. If you configure
an invalid value-for example,
a negative value, string, or
character-the value resets to
default 5.
Permitted Values
Enter the password to authenticate to the
TURN server.
NULL (default)
MSOCS (default)
Disabled
Standard
Enter the IP address of the STUN server.
NULL (default)
The UDP port number of the STUN server.
3478 (default)
1 - 65535
Network
Change Causes Restart or
Reboot
No
Change Causes
Restart or
Reboot
No
No
No
No
126