Dns; Ice - Polycom CX5100 Administrator's Manual

● <ice/>
● <sntp/>
● <port/><rtp/>
● <keepalive/>
● <fileTransfer/>
<dhcp/>
The DHCP parameters listed in the next table enable you to configure how the system reacts to DHCP
changes.
DHCP Parameters
Parameter
tcpIpApp.dhcp.releaseOnLinkRecovery
If 0, no DHCP release occurs. If 1, a DHCP release is performed after the loss and recovery of the network.
<dns/>
The <dns/> parameters listed in the next table enables you to set Domain Name System (DNS). However,
any values set through DHCP have a higher priority and any values set through the <device/> parameter in
a configuration file have a lower priority.
Domain Name System (DNS) Parameters
Parameter
tcpIpApp.dns.address.overrideDHCP
If set to 0, a DNS address is requested from the DHCP server. When set to 1, a DNS primary and secondary address
is set using the parameters tcpIpApp.dns.server and tcpIpApp.dns.altServer.
tcpIpApp.dns.server 1
The primary server to which the system directs DNS queries.
tcpIpApp.dns.altServer
The secondary server to which the system directs DNS queries.
tcpIpApp.dns.domain
The system's DNS domain.
tcpIpApp.dns.domain.overrideDHCP
If set to 0, a domain name is retrieved from the DHCP server, if one is available. If set to 1, the DNS domain name is
set using the parameter tcpIpApp.dns.domain.
1
Change causes system to restart or reboot.
Polycom, Inc.
1
1
1
1
Permitted Values
0 or 1
Permitted Values
0 or 1
IP address
IP address
String
0 or 1
Configuration Parameters
Default
1
Default
0
Null
Null
Null
0
75