Recovery Of Windows Server 2016 / Windows Server 2012 R2 - NEC N8100-2834F Maintenance Manual

Express server
Table of Contents

Advertisement

Chapter 1 Maintenance
6.2

Recovery of Windows Server 2016 / Windows Server 2012 R2

If the Windows does not start normally, you can recover it using the feature of the Windows installation disc.
To run this feature, start the installation disc, and then choose Repair your computer in Windows Setup
wizard.
We recommend that this option is performed by the system administrator.
If the RAID controller driver is required, take the following steps:
1.
Turn on the power to the display and this server in that order or restart.
Set the OS install media.
2.
Press <F11> key during POST to start Boot Menu.
In One-Time Boot Menu, select the optical disc drive to which OS install media is set.
3.
Start the OS from the OS installation media.
The message "Press any key to boot from CD or DVD..." appears on the upper part of the screen.
To boot from the media, press the <Enter> key.
While boot-up proceeds, the message "Loading files..." appears.
4.
Choose Repair your computer in Windows Setup wizard.
5.
Click Troubleshoot.
6.
Click Command Prompt.
7.
After setting Starter Pack DVD to the drive, execute the following command to load the driver:
For on-board RAID controller:
drvload <DVD>:\software\006\drivers\sw_raid1_driver\SmartDQ.inf
For RAID controller (N8103-189/190/191/192/193/194/195/201)
drvload <DVD>:\software\001\drivers\dac1_driver\SmartPqi.inf
8.
Exit the command prompt.
The driver installation is completed.
Note
In case you use an on-board RAID controller and an internal optical disc drive,
load the driver from a removable media.
Copy the following folder from Starter Pack DVD to a removable media
beforehand.
<DVD>:\software\006\drivers\sw_raid1_driver
Tips
In case you use an on-board RAID controller or an internal optical disc drive, load
the driver from a removable media.
drvload <Removable Media>:\sw_raid1_driver\SmartDQ.inf
Tips
The volume label for each drive can be checked from the display result of the dir
command.
Example: dir C:\
Express5800/R120h-1M, R120h-2M (3rd-Gen) Maintenance Guide
6. Windows System Recovery
67

Advertisement

Table of Contents
loading

Table of Contents