Skoda Octavia Workshop Manual page 89

OCTAVIA
Edition 08.98
S00.5104.52.20
Cylinder Head, Valve Gear
K - Use fine grinding paste to grind in valve/valve
seat -arrows- until a proper honing pattern is
achieved.
- Inspect valve for leaks.
The inspection can be carried out using water
colour (proper honing pattern around entire cir-
cumference) or by pouring fuel into the com-
bustion chamber (no fuel should flow out at the
valve seat).
Note:
After installing the cylinder head, inspect hydrau-
lic bucket tappets ⇒ page 15-27.
15
------------ 15-35 ------------