OCTAVIA
Edition 04.03
S00.5104.56.20
Crank Assembly
-
Align marking on ribbed V-belt pulley with
marking on bottom part of toothed belt guard
K -
Check whether TDC marking on flywheel and
drive plate with reference mark are aligned
-arrow-.
I - Manual gearbox
II - Automatic gearbox
-
Fit toothed belt onto camshaft sprocket.
K -
Pull out locking pin and slacken pressure pis-
ton of tensioning device for toothed belt
T 10092.
-
Turn crankshaft twice in the running direc-
tion of the engine, position again to TDC and
check setting.
-
Install top part of toothed belt guard.
Tightening torque: 10 Nm
-
Install engine console.
Tightening torque: 45 Nm
-
Install engine mount.
Tightening torques ⇒ page 10-16
-
Remove supporting device MP 9-200 with
bracket MP 1-224.
-
Install top part of toothed belt guard.
-
Screw on coolant expansion reservoir and
PAS reservoir.
Tightening torque: 10 Nm
-
Install V-ribbed belt and tensioning device
⇒ page 13-1
13
------------ 13-9 ------------