Skoda Octavia Workshop Manual page 136

26
¡ ¢ ¡
------------ ------------
Exhaust System
- Align rear silencer horizontally:
- The suspension bolt at the exhaust pipe
K
should be positioned parallel to the tun-
nel bridge (dimension -X- identical on left
and right).
Note:
On models with separation point ⇒ page 26-4,
additionally check horizontal position of rear si-
lencer at the tail pipes.
£ ¤ ¥ ¦ § ¨ ©  ¤ 
K - Position clamping sleeve with a distance of
 §   ¥
about 5 mm at the line of the marking „A“
-arrow 1- and tighten evenly to 40 Nm in hori-
zontal position.
- Start engine and run at idling speed.
- Seal tail pipes for the duration of the leak
test (e.g. with cloth or plugs).
- Inspect for leaks at connection points of cyl-
inder head/exhaust manifold, exhaust mani-
fold/front exhaust pipe etc. by listening.
- Rectify any leaks found.
exhaust system for
OCTAVIA
Edition 08.98
S00.5104.52.20