Skoda Octavia Workshop Manual page 39

OCTAVIA
Edition 04.01
S00.5104.54.20
Crank Assembly
K - Screw central bolt by hand into the crank-
shaft as far as the stop in order to guide the
seal extractor.
- Turn inner part of seal extractor MP 1-226
two turns out of the outer part, and lock with
knurled screw.
¥ ¦ § ¨ ©    ¦ 
K - Oil threaded head of seal extractor MP 1-
226, fit on and screw as far as possible into
the seal with considerable force.
- Slacken knurled screw and turn inner part
against the crankshaft until the seal is pulled
out.
elastomer seal
- Inspect crankshaft for traces of wear from
seal.
- Lightly oil sealing lip of seal.
K - Fit guide sleeve from MP 1-314 onto the
crankshaft journal.
- Push seal over guide sleeve.
13
¡ ¢ £ ¤
------------ ------------