Skoda Octavia Workshop Manual page 56

15
------------ 15-5.1 ------------
Cylinder Head, Valve Gear
Continued for all models
Note:
Seal intake galleries in cylinder head with clean
cloth.
- Remove top part of toothed belt guard.
- Remove cylinder head cover.
Installing
Installation is carried out in the reverse order;
pay attention to the following points:
Notes:
♦ Replace gaskets of cylinder head cover if
damaged or leaking.
♦ Replace gasket of bottom part of intake mani-
fold.
♦ Tighten bottom part of intake manifold first
to cylinder head, then tighten top part of in-
take manifold to bracket.
♦ Ensure the fuel hoses are tightly connected.
- Adjust throttle cable ⇒ page 20-13.
- Top up coolant if necessary ⇒ page 19-3.
- Electrical connections and routing of cables
⇒ Current Flow Diagrams, Electrical Fault
Finding and Fitting Locations binder
Note:
If the battery earth strap is disconnected and
re-connected, it is necessary to carry out addi-
tional operations
⇒ Electrical System; Repair Group 27.
OCTAVIA
Edition 04.01
S00.5104.54.20