15
24 - Double bearing cap
♦ must be located on dowel sleeves
♦ seal the joints between the double
bearing cap/cylinder head ⇒ Fig. 1
♦ lightly coat the sealing surfaces with
sealant D 454 300 A2 before instal-
lation ⇒ page 15-16
25 - Bearing cap/ outlet camshaft
♦ must be located on dowel sleeves
♦ pay attention to installation position
♦ installation sequence ⇒ page 15-16
------------ 15-14 ------------
Cylinder Head, Valve Gear
26 - Camshaft
♦ runout: max. 0.03
0.05 mm
♦ timing ⇒ page 00-1, Engine charac-
♦ inspecting axial play ⇒ page 15-15
♦ removing and installing camshafts
teristics
⇒ page 15-16
OCTAVIA
Edition 04.03
S00.5104.56.20