Skoda Octavia Workshop Manual page 29

OCTAVIA
Edition 04.01
S00.5104.54.20
¡ ¢ £ ¤ ¥ ¦ § ¨ ¥ © © ¡    © ¡  
Crank Assembly
 ¦      ¥ ¦ §
Note:
Mark direction of running of the ribbed V-belt
before removing it. If an already used belt is fit-
ted on to run in the opposite direction, it may be
destroyed. When installing the belt, ensure it is
correctly located in the belt pulleys.
K - Swivel tensioning device in direction of ar-
row in order to slacken the ribbed V-belt, and
secure with drift -T10060-.
Note:
The tensioning device can be locked with a 3
mm hexagon wrench.
- Take off ribbed V-belt.
ribbed
Note:
Before installing the ribbed V-belt, ensure that
all the components (alternator, AC compressor,
hydraulic pump) are tightly fitted on.
- Fit on ribbed V-belt.
K - Slacken tensioning device for ribbed V-belt.
Remove drift T10060 -arrows-.
- Start engine and check running of belt.
Note:
Engines with AC compressor are equipped with
a double ribbed V-belt.
  © ¡  
------------ 13-3 ------------
13