10
¡ ¢ £
------------
------------
Removing and Installing Engine
K -
Detach the earth cable -1- from the top en-
gine/gearbox connecting bolt.
-
Unplug connector -2- and pull out of the fix-
ture.
-
Take off cable -3- and -4- at the starter.
-
Detach cables from the fixture at the starter
and place to the side. Unbolt fixture.
K -
Detach fuel feed pipe -1- and fuel return flow
pipe -2- (press release catches).
Important!
Fuel feed pipe is pressurised! Place cleaning rags
around the connection point before detaching the
hose connections. After this, release the pressure
by carefully detaching the hose.
K -
Unplug the following electrical connections:
1 - Knock sensor I (G61) (black)
2 - Knock sensor II (G66) (brown)
3 - Engine speed sender (G28) (grey)
OCTAVIA
Edition 11.96
S00.5104.51.20