Skoda Octavia Workshop Manual page 37

OCTAVIA
Edition 04.03
S00.5104.56.20
Crank Assembly
K Fig. 1 Installing intermediate plate
- Attach intermediate plate to the sealing
flange and fit onto dowel sleeves -arrows-.
K Fig. 2 Seal versions
I Elastomer seal
1 sealing lip -1-; with worm spring
II PTFE seal
Several sealing lips -2-; without worm spring
Notes:
♦ Do not moisten PTFE seal with oil before
installing. The shaft must also be free of oil
and grease.
♦ Do not replace a PTFE seal (new version)
with an elastomer seal (old version).
♦ A PTFE seal may be installed in place of an
elastomer seal.
13
------------ 13-11 ------------