Skoda Octavia Workshop Manual page 75

OCTAVIA
Edition 04.01
S00.5104.54.20
Cylinder Head, Valve Gear
K - Screw bolt for attaching camshaft sprocket
-arrow- by hand into the camshaft as far as
the stop in order to guide the seal extractor.
- Turn inner part of seal extractor MP 1-215
two turns (about 3 mm) out of the outer part,
and lock with knurled screw.
K - Oil threaded head of seal extractor MP 1-
215, fit on and screw as far as possible into
the seal using considerable pressure.
- Slacken knurled screw and turn inner part of
the seal extractor against the camshaft until
the seal is pulled out.
¢ £ ¤ ¥ ¥ ¦ ¡
¡
- Lightly oil sealing lip of seal.
K - Fit guide sleeve MP 1-228/2 onto the cam-
shaft journal.
- Push seal over guide sleeve.
¨ ¥ ¤ ¢ £ ©
§  ¨ 
seal
15
------------ 15-23 ------------