Skoda Octavia Workshop Manual page 97

OCTAVIA
Edition 10.99
S00.5104.53.20
£ ¤ ¥ ¦ § ¨ © ¦ § ¥ ¤   ¦ §  ¨  ¨  ¦         ¥    ! " # " $ % &  ¥ ¥ '  § ( ¦  ¥ )  ( 0 ¨  1 2 § ¥
3 ) ) 4 5 ♦ 7 ' ¨  0     ¦ §       ¥    8 9 % 5 5 5 3 ) )
Lubrication System
K -
$ © ©   ¨  ¨  ¦         ¥ ¥ ¦ ¥ '           ¨  1  ¤ ( §    ¦ § ¥ '  ¦ ¨  ©  
@
¨  ¥ '  ¨   ¤  ¥ (  ¥ ¨ ¦  5
Note:
The sealant bead must not be thicker than 3
mm otherwise excess sealant may get into the
oil pan and block the strainer in the oil suction
C ¨ ¥ ¦  ¦ ¨  ©   ¨ ) )  8 ¨  ¥   @   8 ¥ ¨ 1 ' ¥    ¦  ¥    § ¦   ¦ B  9  5
pipe.
D  ¨ ¥ ¨    @
  ¨ 1 ' ¥  @ A 8 ¨  1 ¦     @   ( ¦   5 % 5 D  ¨ ¥ ¨    @ ¥ ¨ 1 ' ¥   ¥ '  ¥ ' (    ¦  ¥  ¦ § ¦ ¨  ©   E 1   (  ¦   ¦  0 ¦   @
  ¨ 1 ' ¥  @ 5 3 5 D  ¨ ¥ ¨    @ ¥ ¨ 1 ' ¥      ¥ '   ¦  ¥  ¦ § ¦ ¨  ©   E  @  ¨  8  (   ¦  0   ¨ 1 ' ¥  @ A 8 ¨  1 ¦     @   ( ¦   5 " 5 7 ¨ 1 ' ¥   ¥ '  ¥ ' (    ¦  ¥  ¦ § ¥ '  ¦ ¨  ©   E 1   (  ¦ G ¥ ¦  § ¨    ¥ ¦ (
K -
Note:
Apply sealant bead with particular care in the
area of the rear sealing flange -arrows-.
I 5 7 ¨ 1 ' ¥      ¥ '   ¦  ¥  ¦ § ¦ ¨  ©   E  @  ¨  8  (   ¦  0 8 ¨  1 ¦     @   ( ¦   ¥ ¦  § ¨    ¥ ¦ ( H ¤  ¦ §  I P ) 5
-
♦
♦
Notes:
When fitting the oil pan onto the engine when
removed, ensure that the oil pan finishes
flush with the cylinder block at the flywheel
side.
After fitting on the oil pan, allow the sealant
to dry for about 30 minutes. Do not pour in
engine oil until after this waiting period.
¦ § ¥ ¨ ©   ¦ ¤ ¥
∅
   ' ¦
B 
A
¥ ¨ 1 ' ¥       ¦  ¥  ¦ § ¦ ¨  ©  
F  ( @
G
H ¤  ¦ § " I P ) 5
17
E  @  ¨  8  (
¡ ¢ ¡
------------ ------------