Skoda Octavia Workshop Manual page 32

13
------------ 13-6 ------------
Crank Assembly
Special tools, testers and aids required
♦ Torque wrench
♦ Counterholder MP 1-216
♦ Holder MP 1-224
♦ Counterholder MP 1-310
♦ Supporting device for engine MP 9-200
♦ Locking pin, e.g. T40011
♦ Tensioning bolt T 10092
Removing toothed belt
(engine installed)
- Remove ribbed V-belt and tensioning device
⇒ page 13-1.
K - Unbolt coolant expansion reservoir -arrows-
and PAS reservoir and place down to the
side; hoses remain connected.
- Remove top part of toothed belt guard.
K - Insert supporting device MP 9-200.
- Bolt holder MP 1-224 tight to the right lifting
eye and attach to supporting device MP
9-200.
- Take up weight of engine with the spindle of
the supporting device MP 9-200.
OCTAVIA
Edition 02.02
S00.5104.55.20