Skoda Octavia Workshop Manual page 119

OCTAVIA
8 - Vent valve
♦ inspecting ⇒ Fig. 1
9 - Earth connection
10 - 10 Nm
11 - Vent line
12 - Fuel tank
♦ removing and installing ⇒ page 20-6
13 - Clamping washer
♦ removing: turn to the left
♦ installing: tighten to 2 Nm
14 - Heat shield
♦ for fuel tank
15 - 20 Nm + 90°
♦ replace
16 - Clamping nut
♦ installing: tighten to 2 Nm
17 - Cover
♦ for fuel tank
♦ not fitted to all models
18 - Tensioning strap
♦ pay attention to different lengths
19 - Feed line
♦ black
♦ to fuel rail
♦ to detach, press unlocking button at
connector
Edition 04.01
S00.5104.54.20
Fuel Supply System
20 - Fuel filter
♦ installation position: arrow points in
direction of flow
21 - Retaining clip
♦ for fuel filter
22 - Seal
♦ moisten with fuel for installing
♦ replace if damaged
23 - Electric fuel delivery unit
♦ removing and installing ⇒ page 20-5
♦ testing fuel pump ⇒ page 20-9
♦ removing and installing fuel level
sender ⇒ page 20-6
♦ testing holding pressure:
⇒ 1.8 l/92 kW Engine - Motronic Fuel Injec-
tion and Ignition System; Repair Group 24
24 - Union nut, 80 Nm
♦ use wrench MP 1-227 for removing
and installing
25 - Feed line
♦ black
♦ to fuel filter
♦ fitted onto connection marked „V“ at
closing flange
♦ for detaching from flange, press un-
locking button on connector
26 - Return-flow line
♦ blue
♦ from fuel rail
♦ fitted onto connection marked „R“ at
closing flange
♦ for detaching from flange, press un-
locking button on connector
K Fig. 1 Inspecting vent valve
Lever in off position:
Valve closed
Lever pushed in direction of arrow:
Valve open
20
------------ 20-3 ------------