Saving A Copy Of The Current Log To Your Computer; Upgrading The Firmware - Ruckus Wireless ZoneFlex 2925 User Manual

4. In Server Address, enter the FTP or TFTP server IP address.
5. In Filename, enter a name for this file that you are saving.
NOTE:: Remember to add a .TXT file extension to the file name, especially if you are
using Internet Explorer as your Web Admin "host".
6. Click Upload Now.

Saving a Copy of the Current Log to Your Computer

You can also save a copy of the current log to your own computer, if needed.
1. Go to Maintenance > Support Info. The Maintenance :: Support Info workspace
appears.
2. Review the Upload Method options
3. Click the Save to local computer option.
4. Click Upload Now.
5. When the "Save as..." dialog box appears, change the destination directory and
change the file name if you prefer.
6. Click Save to save the file to your computer.

Upgrading the Firmware

You can use the Web interface to check for software updates/upgrades for the
firmware built into the AP. You can then apply these updates to the device in one of
two ways: (1) manual updating on an as-needed basis or (2) automating a regularly
scheduled update.
Before starting, decide which option you want to take:
• Automate a regularly scheduled update
• Run a one-time manual update right now.
By default, the automatic upgrade option is active, and will check the Ruckus Wireless
update server every 12 hours.
To get started with upgrading the firmware, go to Maintenance > Upgrade. When
the Maintenance > Upgrade options appear, decide which upgrade method to use.
Each of the three upgrade options listed on the Upgrade page are discussed in the
succeeding sections.
Figure 39. The Maintenance > Upgrade page
Managing the Access Point

Upgrading the Firmware

77