Avaya IP500 V2 Installation Manual page 91

Hide thumbs Also See for IP500 V2:

Table of Contents

1. External expansion modules should not be attached to a control unit that has power.

2. If the IP Office system is being installed in a rack, attach the

3. Attach the external expansion module's power supply but do not switch power on.

4. Connect the expansion interconnect cable from the module's EXPANSION port to the EXPANSION port on the control

unit. Make careful note of the port used and include this detail on the cable label and any other system records.

Installing IP500/IP500 V2

IP Office 9.0

IP500 V2 Installation: Connecting External Expansion Modules

rack mounting kit

to the expansion module.

15-601042 Issue 28c (19 August 2013)