Bri So8 - Avaya IP500 V2 Installation Manual

10.5.2 BRI So8

The So8 module can be used to add ETSI BRI S0-interface ports to the IP Office system. These ports can then be used for
the connection of ISDN devices.
Feature Details
Supported on IP500 and IP500 V2. The control unit must be running in IP Office standard mode.
Locales Supported in all
Software Level IP Office core software level 1.0 minimum. Bin file = nas0-16.bin.
Included Power supply unit (see below) and Expansion Interconnect cable.
Power Supply The unit is supplied with an earthed 3-Pin, 60W external power supply unit. The PSU has an integral
power cord for connection to the unit's DC I/P socket. A locale specific
39
Mounting The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be wall or rack mounted using the
Dimensions Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8"/2U.
Weight Unboxed: 2.8Kg/6.3lbs. Boxed: 4.1Kg/9.2lbs.
Module Front
Port · Green On = Connected.
LEDs
· Green Flashing = Activity.
Module The center LED on all external expansion modules is used to indicate the overall state of the module as
Center follows:
LED
· Red flashing = Module starting up/Loading firmware.
· Red on = Error.
· Green on = Module okay.
Installing IP500/IP500 V2
IP Office 9.0
IP Office locales
for the external PSU is required but is not supplied with the unit.
System Components: IP500 External Expansion Modules
.
51
IEC60320 C13 power cord
IPO IP500 RACK MNTG KIT V3
15-601042 Issue 28c (19 August 2013)
.
278
Page 243