Avaya IP500 V2 Installation Manual page 275

Module Rear
Ports Description
DC I/P DC power input port. Used for connection of the power lead from an Avaya 40W external power
393
supply unit supplied with the expansion module. A locale specific
external PSU is required but is not supplied with the module.
DTE 25-Way D-Type socket. For Avaya use only.
EXPANSION RJ45 Socket. Used for direct connection to an Expansion port on an IP Office control unit using the
395
Expansion Interconnect cable supplied with the module.
POT RJ45 socket. Used for connection of analog phones.
398
If connected to an
Barrier Box devices in addition to the buildings primary protection. The module must also be
connected to a protective ground.
Function ground point. Used for connection of a
older modules where this screw is not present, the top-center cover screw should be used instead.
Must be connected if any
Part Codes and Related Equipment
All expansion modules are supplied with a base software level and should be upgraded to match the core software of the
control unit in the IP Office system. Expansion modules include an external power supply unit (PSU) and an appropriate
interconnect cable. They do not include a locale specific power cord for the external PSU or any phone extension cables.
Item
IP400 Phone V1
IEC60320 C7 Power Cord
IP400 Rack Mounting Kit
Installing IP500/IP500 V2
IP Office 9.0
out-of-building extension
out-of-building extensions
Variant
8 Ports
16 Ports
30 Ports
CEE7/16
BS1363
NEMA1-15
Korea
System Components: IP400 Expansion Modules
IEC60320 C7 power cord
, the connection must be made via additional IP Office
45
protective or functional ground
are connected to this module.
45
Country SAP Code
All 700184773
700184781
700184799
Europe 700213382
United Kingdom 700213374
America 700213390
Korea 700254519
All 700210800
15-601042 Issue 28c (19 August 2013)
for the
39
if required. On
208
Page 275