Avaya IP500 V2 Installation Manual page 176

Polycom Video Module Settings
The Polycom modules used in the previous example were the Viewstation 128, Viewstation 256 and Viewstation MP.
The Polycom module must have software that supports 'Standard ETSI ISDN' (European ISDN) and have its ISDN Switch
Protocol setting set to 'Standard ETSI Euro-ISDN'
The following were the settings used during testing:
Characteristics
· Polycom View Station 512 MP.
· NTSC UIS Interface.
· View Station PVS 1419.
Admin/General Setup
· Country: USA
· Language: English (USA)
· Auto Answer: Yes
· AllowDial: Yes
· Allow User Setup: Yes
· Maximum Time on Call: 480.
User Setup
· Auto Answer: Yes
· PIP: Auto
· Far Control of Near Camera: Yes
· MP Mode: Auto
System Information
· Release: 7.0.1
· Model: VS: 512
Admin/Video Network
· MultiPoint Setup: Auto
Installing IP500/IP500 V2
IP Office 9.0
Admin/Software and Hardware/Software
· Software: 7.0.1.
· Network Interface: S/T Interface.
· ISDN Version: IEUS v18:a00320
Admin/Video Network/ISDN Video Network
· Country Code: 1
· Area Code: 732
· Number A: blank
· Number B: blank
· ISDN Switch Protocol: Standard ETSI Euro-ISDN.
Admin/Video Network/IMUX
· Numbers: blank
· SPID: blank
· Audio Quality: 168KB/s
· Advanced Dialing: Dial Channels in Parallel
Admin/Software and Hardware/Hardware
· Camera: NTSC
· Video Comm Interface: ISDN_Quad_BRI
· Network Interface Type: S/T Interface
Admin/Video Network/Call Preference
· ISDN Video Calls (H:320): Yes
15-601042 Issue 28c (19 August 2013)
Page 176