Phone 16/30 - Avaya IP500 V2 Installation Manual

10.5.6 Phone 16/30

IP500 Phone modules can be used to add additional PHONE ports to an IP Office system.
The module is available in 16 and 30 port variants, referred to as the IP500 Phone 16 and IP500 Phone 30 respectively.
Feature Details
Supported on IP500 and IP500 V2.
Locales Supported in all
Software Level IP Office core software level 2.1(36) minimum. Bin file = dvpots.bin.
Included Power supply unit (see below) and Expansion Interconnect cable.
Power Supply The module is supplied with a Earthed 3-Pin, 60W external power supply unit. The PSU has an
integral power cord for connection to the module's DC I/P socket. A locale specific
power cord
Mounting The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be wall or rack mounted using the
Dimensions Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8".
Weight Unboxed: 3.1Kg/6.94lbs. Boxed: 4.4Kg/9.7lbs. (Based on Phone 30 V2)
Module Front
Module The center LED on all external expansion modules is used to indicate the overall state of the module as
Center follows:
LED
· Red flashing = Module starting up/Loading firmware.
· Red on = Error.
· Green on = Module okay.
· Green flashing = Module starting up/Loading firmware (IP500 DS16A/30A module only).
Installing IP500/IP500 V2
IP Office 9.0
IP Office locales .
51
for the external PSU is required but is not supplied with the module.
39
IEC60320 C13
IPO IP500 RACK MNTG KIT V3
15-601042 Issue 28c (19 August 2013)
.
278
Page 252