Phone Add-Ons - Avaya IP500 V2 Installation Manual

10.12 Phone Add-Ons

For IP Office Release 5.0 and higher, the maximum combined number of buttons on buttons modules per system is 1024.
T3 DSS modules are not included in the combined limits stated above but are limited to 30 T3 DSS modules (1080
buttons).
· 1100 KEM: +18 (Max 3 per phone, 56 per system.)
Add-on for 1120E and 1140E phones. Each module provides 18 additional programmable buttons.
· 1200 KEM: +12 (Max 7 per phone, 85 per system.)
Add-on for 1220 and 1230 phones. Each module provides 12 additional programmable buttons.
4450 : +60 (Max 2 per phone, 2 per external expansion module or control unit, 8 per system.)
·
357
Add-on for 4412D+ and 4424D+ phones. Provides an additional 60 programmable buttons with a single lamp - red
except for the bottom two rows which are green. Due to the single lamp not recommended for appearance
functions as not all button states can be indicated.
· BM12: +24 (Max 3 per phone, 32 per system.)
Add-on for 9508
325
features. When used with a 9508, power must be supplied to the phone using an inline power module such as the
1151C or equivalent.
BM32 : +32 (Max 3 per phone, 32 per system.)
· 358
Add-on for the 1616 phones that provides two columns of 16 buttons. Up to 3 BM32 modules are supported with
any 1616. For IP Office 5.0, up to a maximum of 32 BM32 modules total are supported the IP Office system.
DBM32 : +32 (Max 3 per phone, 32 per system.)
· 359
Add-on for the 1416 phones that provides two columns of 16 buttons. Up to 3 BM32 modules are supported with
any 4616. For IP Office 5.0, up to a maximum of 32 BM32 modules total are supported the IP Office system.
EU24 : +24 (Max 1 per phone, 8 per system.)
·
360
Add-on for the 2420, 4620, 4620SW, 4625, 5420, 5620, 5620SW and 5621. Provides an additional 24
programmable buttons. Button display icons are on two switchable pages with 12 icons on each page.
EU24BL : +24 (Max 1 per phone, 8 per system.)
· 361
As per the EU24 above but with a backlight function to match the 4621. Not supported on the 2420 and 5420.
KLM : +48 (Max 2 per phone, 21 per system.)
·
362
Used with M7324
346
programmable buttons.
SMB24 : +24 (Max 3 per phone, 42 per system.)
· 363
Supported with 9630G, 9640, 9640G, 9650 and 9650C telephones. For IP Office Release 9.0, also supported with
9608, 9611 and 9641.
T3 DSS : +36 (Max 3 per phone, 30 per system.)
· 364
Up to 3 of these units can be connected to any of the IP Office T3 phones. Each provides an additional 36
programmable buttons. Each button includes a single red status LED. Maximum 3 per phone, 30 per system.
Connection of the T3 DSS varies:
· With non-IP models, the first T3 DSS connects directly to a link port on the phone. No additional power
supplies are required.
· With T3 IP Models, the first T3 DSS connects to a DSS Link Unit fitted to the phone. A power supply is required
for the DSS.
T7316E KEM : +24 (Max 9 per phone, 42 per system.)
· 365
Used with T7316E
are supported per phone without additional power supply. Up to 4 buttons modules are supported per phone
without additional power supply. From 5 to 9 modules can be supported with additional power. Maximum 9 per
phone (4 without additional power).
XM24 : +24 (Max 1 per phone, 2 per expansion module or control unit, 21 per system.)
·
366
Add-on for 6416D and 6424D phones. Provides an additional 24 programmable buttons. Connects direct to phone.
Installing IP500/IP500 V2
IP Office 9.0
, 9608 , 9611 and
326 327
phones. Up to 2 buttons modules are supported per phone. Each button module provides 48
phones. Each button module provides 24 programmable buttons. Up to 4 buttons modules
350
9641 phones. Provides 12 buttons assignable in 2 pages for 24
335
System Components: Phones
15-601042 Issue 28c (19 August 2013)
Page 355