Upgrading Card Software - Avaya IP500 V2 Installation Manual

7.11 Upgrading Card Software

In addition to using the traditional
required set of firmware files onto the System SD card and rebooting the system.
!
IP Office Technical Bulletins
·
Ensure that you have obtained and read the IP Office Technical Bulletin relating to the IP Office software release
which you are installing. This bulletin will contain important information that may not have been included in this
manual. IP Office Technical Bulletins are available from the
!
Upgrade Licenses
·
Some upgrades may require entry of upgrade licenses. It is still possible to upgrade the system without the
necessary licenses, however the system will not provide any telephony functions after the upgrade until the
appropriate license is added to the system configuration.
!
WARNING
·
This process requires the IP Office system to reboot in order to complete the changes. The reboot ends any current
calls and services.
There are a number of ways in which this can be done.
Method
Using IP Office
Manager
164
System SD Card
Upgrade
164
Upgrade from
Optional SD Card
165
Installing IP500/IP500 V2
IP Office 9.0
IP Office Upgrade Wizard
Description
Using IP Office Manager, the contents of the card are
compared to the files that IP Office Manager has
available and are upgraded if necessary.
In this method, the System SD card is shut down and
removed from the control unit. The card's contents are
upgraded using IP Office Manager.
This method uses an SD card loaded with the required
version of IP Office software. The card is inserted into
the control unit's Option SD card slot and its contents
copied to the System SD card.
SD Card Management: Restoring from a PC
, IP500 V2 control units can be upgraded by loading the
162
Avaya support website (http://support.avaya.com).
Location
Local or
Remote
Software Embedded
Files Voicemail
Local
Local
15-601042 Issue 28c (19 August 2013)
Prompts
–
Page 139