Avaya IP500 V2 Installation Manual page 219

IP500 ETR6 Base Card
Unified Communications Module
Installing IP500/IP500 V2
IP Office 9.0
228
This card is only supported in an IP500 V2 control unit running in IP
Office Basic Edition - PARTNER® Mode or IP Office Basic Edition. It
provides 6 ETR ports for connection of ETR phones. 2 Analog extension
ports are also provided for emergency use only with an analog trunk
card.
· The card can be fitted with an IP500 trunk daughter card which uses
the base card ports for trunk connection.
· Maximum: 3 per IP500 V2 control unit. Not supported by IP500
control units.
· The analog phone ports do not include a ringing capacitor. Where this
is a requirement, connection should be via a Master socket containing
ringing capacitors.
· If fitted with an IP500 Analog Trunk daughter card, during power
failure phone ports 7 and 8 are connected to analog trunk port 12.
However during normal operation analog phone ports 7 and 8 are not
useable.
225
This card is only supported in an IP500 V2 control unit running in IP
Office standard modes. It acts as an embedded Linux server for the
one-X Portal for IP Office and/or Voicemail Pro applications.
The presence of this card acts as an automatic Preferred Edition
license for the system.
System Components: IP500 Base Cards
15-601042 Issue 28c (19 August 2013)
Page 219