Digital Station 16/30 - Avaya IP500 V2 Installation Manual

10.5.3 Digital Station 16/30

IP Office 500 Digital Station modules can be used to add additional
available in 16 and 30 port variants, referred to as the IP500 DS16 and IP500 DS30 respectively. These modules are also
known as IP500 DS V2 modules. This module has been superseded by the
Feature Details
Supported on IP500 and IP500 V2.
Locales Supported in all
Software Level IP Office core software level 2.1(31) minimum. Bin file = nadcpV2.bin.
Included Power supply unit (see below) and Expansion Interconnect cable.
Power Supply The module is supplied with a Earthed 3-Pin, 60W external power supply module. The PSU has an
integral power cord for connection to the module's DC I/P socket. A locale specific
power cord
Mounting The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be wall or rack mounted using the
Dimensions Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8".
Weight Unboxed: 3.5Kg/7.8lbs. Boxed: 4.8Kg/10.8lbs. (Based on DS30)
Module Front
Port · Green Flashing = Phone detected.
LEDs
· Green On = Phone active.
Module The center LED on all external expansion modules is used to indicate the overall state of the module as
Center follows:
LED
· Red flashing = Module starting up/Loading firmware.
· Red on = Error.
· Green on = Module okay.
Installing IP500/IP500 V2
IP Office 9.0
IP Office locales .
51
for the external PSU is required but is not supplied with the module.
39
System Components: IP500 External Expansion Modules
DS ports to an IP Office system. The module is
393
IP500 DS16B/30B
IPO IP500 RACK MNTG KIT V3
15-601042 Issue 28c (19 August 2013)
.
250
IEC60320 C13
.
278
Page 245