Ip500 External Expansion Modules - Avaya IP500 V2 Installation Manual

1.9.1 IP500 External Expansion Modules

The following IP500 external expansion modules are supported by IP Office Release 9.0. Each module uses an external
power supply unit supplied with the module. A locale specific
39
The external module can be stacked on top of the control unit. They can also be wall or rack mounted using one of the
Office mounting kits .
278
· Systems running in IP Office Basic Edition modes support up to 8 external expansion modules so long as the
system extensions limit is not exceeded.
· Systems running in IP Office standard modes support 8 external expansion modules or 12 if the control unit is fitted
with an IP500 4-Port Expansion Base Card.
IP500 Digital Station Module
·
Provides, depending on variant, an additional 16 or 30 RJ45
supported Avaya DS digital phones
IP500 Digital Station A Module
·
Provides, depending on variant, RJ21 ports for connection of an additional 16 or
30 Avaya TCM digital phones
IP500 Digital Station B Module
·
Provides, depending on variant, an additional 16 or 30 RJ45 ports. These can
be used as either DS
393
TCM ports for supported for supported
401
However, each module can only support one port type at any time.
IP500 Phone Module
·
Provides, depending on variant, an additional 16 or 30
connecting analog phones.
Installing IP500/IP500 V2
IP Office 9.0
245
.
48
247
. Supported by IP500 V2 only.
48
250
ports for supported Avaya DS digital phones
Avaya TCM digital phones
252
power cord for the PSU must be ordered separately.
40
DS ports for
393
or
48
.
48
PHONE ports for
398
15-601042 Issue 28c (19 August 2013)
IP
Page 34