Outputting Logs To The Log Host - Huawei Quidway S9300 Configuration Manual

2 Information Center Configuration
1.
2.
Step 2 Configuring the information channel through which logs are output to the terminal
1.
2.
Step 3 Enabling terminal display
1.
2.
----End

2.2.10 Outputting Logs to the Log Host

By outputting logs to the log host, you can view the operating status of the device on the log
host.
Context
Do as follows on the switch configured with the information center:
Procedure
Step 1 Configuring the logs to be output through the channel
1.
2-14
Run:
system-view
The system view is displayed.
Run:
info-center source { module-name | default }
channel-name } [ log { state { off | on } | level severity } * | trap
{ state { off | on } | level severity } * | debug
level severity } * ] *
Logs are added to the information channel.
Logs can be output only after the information center is enabled. By default, the timestamp
format of logs is date.
Run:
info-center monitor channel { channel-number | channel-name }
The information channel through which logs are output to the terminal is configured.
Run:
quit
Back to the user view.
Run:
system-view
The system view is displayed.
terminal monitor
Terminal display is enabled.
Run:
terminal logging
Displaying logs on the terminal is enabled.
Do as follows on the switch configured with the information center, run:
system-view
The system view is displayed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
channel { channel-number |
{ state { off | on } |
Issue 01 (2010-12-15)