Configuring Auto Key Settings - Motorola AP-7131N-FGR Product Reference Manual

Inbound SPI (Hex)
Outbound SPI (Hex)
The Inbound and Outbound SPI settings are required to be interpolated to function correctly.
For example:
• AP1 Inbound SPI = 800
• AP1 Outbound SPI = 801
• AP2 Inbound SPI = 801
• AP2 Outbound SPI = 800
4. Click Ok to return to the VPN screen. Click
Key Settings
5. Click Cancel
Manual Key Settings

6.7.3 Configuring Auto Key Settings

The access point's Network Management System can automatically set encryption and
authentication keys for VPN access. Use the
encryption and authentication, without specifying the keys. To manually specify keys, cancel out of
the Auto Key Settings
within the Manual Key Setting
To configure auto key settings for the access point:
1. Select Network Configuration
2. Refer to the VPN Tunnel Config
and click the
Define an (up to) six-character (maximum) hexadecimal value to
identify the inbound security association created by the encryption
algorithm. The value must match the corresponding outbound SPI
value configured on the remote security gateway.
Enter an (up to) six-character (maximum) hexadecimal value to
identify the outbound security association created by the
encryption algorithm. The value must match the corresponding
inbound SPI value configured on the remote security gateway.
screen.
to return to the VPN screen without retaining the changes made to the
screen.
screen, select the Manual Key Exchange
screen.
->
field, select the
Auto Key Settings button.
to retain the settings made on the
Apply
Auto Key Settings screen to specify the type of
WAN -> VPN from the access point menu tree.
Auto (IKE) Key Exchange
Configuring Access Point Security
radio button, and set the keys
radio button
6-33
Manual