Motorola AP-7131N-FGR Product Reference Manual page 638

9-26 AP-7131N-FGR Access Point Product Reference Guide
3. Create a mesh supported WLAN with the
selected.
NOTE This WLAN should not be mapped to any radio. Therefore, leave both of
4. Select the
radio. Use the
created in step 3.
NOTE You don't need to configure channel settings on the client bridge (AP#3). It
5. If needed, create another WLAN mapped to the 802.11b/g/n radio if 802.11b/g/n support is
required for MUs on that 802.11 band.
the "Available On" radio options unselected.
Client Bridge checkbox to enable client bridge functionality on the 802.11a/n
Mesh Network Name
automatically finds the base bridges (AP#1 and AP#2) and uses the
channel assigned to them.
Enable Client Bridge Backhaul
drop-down menu to select the name of the WLAN
option