Motorola AP-7131N-FGR Product Reference Manual page 682

B-4 AP-7131N-FGR Access Point Product Reference Guide
The setup example described in this section includes:
• 1 AP-7131N-FGR access point
• 1 Microsoft Windows DHCP Server
• 1 SFTP Server.
To configure Global options using extended/standard options:
1. Set the Windows DHCP Server and access point on the same Ethernet segment.
2. Configure the Windows based DHCP Server as follows:
a. Highlight the Server Domain Name (for example, apfw.motorola.com). From the
menu, select
b. Add the following 3 new options under
Extended Options
Access point SFTP Server IP Address
(Note: Use any one option)
Access point Firmware File Name
Access point Config File Name
(Note: Use any one option)
Standard Options
Access point SFTP Server IP Address
Access point Firmware File Name
NOTE If using Standard Options and the configuration of the access point needs
c. Highlight
d. Under the
and enter a value for each option.
3. Copy both the firmware and configuration files to the appropriate directory on the SFTP
Server.
Set Predefined Options.
to be changed, use option 129 or 188 as specified in the Extended Options
table. Standard options 66 and 67 are already present in the DHCP
Standard Options Class by default.
Scope Options and select
General tab, check all 3 options mentioned within the Extended Options table
DHCP Standard Options
Code Data type
181 IP address
186 String
187 String
129 String
188 String
Code Data type
66 String
67 String
Configure Options.
Action
class: