Motorola AP-7131N-FGR Product Reference Manual page 133

2. Configure the RF Trap Thresholds
NOTE Average Bit Speed,% of Non-Unicast, Average Signal, Average Retries,%
Dropped and % Undecryptable are not access point statistics.
Pkts/s
Throughput
Average Bit Speed
Average Signal
field to define device threshold values for SNMP traps.
Enter a maximum threshold for the total throughput in Pps (Packets
per second).
Set a maximum threshold for the total throughput in Mbps
(Megabits per second).
Enter a minimum threshold for the average bit speed in Mbps
(Megabits per second).
Enter a minimum threshold for the average signal strength in dBm
for each device.
System Configuration 4-43