Motorola AP-7131N-FGR Product Reference Manual page 79

5.0 GHz WLAN - no Sensor
Radios Off
5. Select the Quick Setup screen's
WAN or LAN configuration values. The WAN tab displays by default.
Set a minimum set of parameters for using the WAN interface.
a. Select the Enable WAN Interface
access point and a larger network or outside world through the WAN port. Disable this
option to effectively isolate the access point's WAN connection. No connections to a
larger network or the Internet will be possible. MUs cannot communicate beyond the
configured subnets.
b. Select the This Interface is a DHCP Client
point's WAN connection. This is useful, if the larger corporate network or Internet
Service Provider (ISP) uses DHCP. DHCP is a protocol that includes mechanisms for IP
Radio1 Disabled,
Radio 2 WLAN
Radios 1 and 2 Disabled
Network Configuration
checkbox to enable a connection between the
checkbox to enable DHCP for the access
Getting Started
tab to define a minimum set of
3-11